RA-L Special Issue Call for Papers Deadline: Aerial Manipulation
On 10 Sep, 2017
A Special Issue proposal by
V. LIPPIELLO, F. RUGGIERO, A. OLLERO
While unmanned aerial vehicles and drones are commonplace by now in applications such as picture taking or surveying, much research work remains to be done in applications where aerial vehicles must act on the environment by entering in contact with it.
By aerial manipulation it is intended the grasping, transporting, positioning, assembly and disassembly of mechanical parts, measurement instruments and any kind of objects, performed with UAVs endowed with small robotic arm(s) and gripper(s). This Special Issue aims at collecting the latest results achieved by researchers working in mechatronics, sensing, motion planning and control within the aerial manipulation research field. The proposed topic is strongly multidisciplinary, and the expected audience is wide.
MotivationThe introduction of aerial manipulation can be helpful especially in those industrial and service applications that are considered very dangerous for a human operator. For instance, think to a task of bridge inspection, high-voltage electric lines inspection and fixing-up, rotor blade repairing and so on. These tasks are both very unsafe and expensive, since the performance of professional climbers and specialists is requested. An unmanned aerial manipulator might indeed assist the human operator in these jobs or, at least, in the most hazardous and critical situations. Grasping an object during the flight with a UAV (equipped with only a gripper) poses several problems due to the under-actuation of the aerial vehicle, its unstable dynamics, and the coupling effects given by the presence of the object. The bigger the carried payload, the bigger should be the capacity of the single employed UAV. However, the sole gripper is not enough to obtain a complete evolution from passive into active tasks of the unmanned aerial vehicles: mechanical structures mounted on the UAVs are then essential to perform more complex actions. Therefore, an aerial manipulator might be an efficient solution providing an aerial vehicle with the capability of performing dexterous manipulation tasks. Nevertheless, like the presence of a carried object creates coupling effects in the dynamic model of the system, a mounted robot arm provides even more issues since its dynamics depends on the actual configuration state of the whole system.
Topics of Interest
- Control of aerial manipulators
- Control of UAV in contact with the environment
- Motion planning of aerial manipulators
- Perception in aerial manipulation
- Mechatronic design of aerial manipulators
ENDORSEMENTThis proposed journal Special Issue is supported by the IEEE RAS Technical Committee on Aerial Robotics and Unmanned Aerial Vehicles as confirmed by the Technical Committee co-chair Anibal Ollero, also on behalf of the other co-chairs YangQuan Chen and Kimon P. Valvanis. Please, see the related endorsement email in attachment.
TIMELINESpecial Issue Call Publication: July 25, 2017
Special Issue Submission Opens: September 1, 2017
Special Issue Submission Closes: September 10, 2017
First Decision Communicated to Authors: December 5, 2017
Final Decision Communicated to Authors: February 8, 2018
Accepted RAL Papers appear on Xplore: February 27, 2018