|
Paper Title |
Vol |
Iss |
Author Name |
|
The Development of an Intelligent
Web-Based Rapid Prototyping Manufacturing System |
1 |
1 |
R. C. Luo and J. H. Tzou |
|
Development of an Intelligent Energy
Management Network for Building Automation |
1 |
1 |
H.-Y. Huang, J.-Y. Yen, S.-L. Chen, and F.-C. Ou |
|
1 |
1 |
P. Chen, Z. Fu, A. Lim, and B.
Rodrigues |
|
|
Design of Six Sigma Supply Chains |
1 |
1 |
D. Garg, Y. Narahari, and N.
Viswanadham |
|
Development of Holonic Information
Coordination Systems With Failure-Recovery Consideration |
1 |
1 |
F.-T. Cheng, H.-C. Yang, and J.-Y. Lin |
|
Statistical Estimation and Testing
for Variation Root-Cause Identification of Multistage Manufacturing Processes |
1 |
1 |
S. Zhou, Y. Chen, and J. Sh |
|
Increasing Throughput for Robotic
Cells With Parallel Machines and Multiple Robots |
1 |
1 |
H. N. Geismar, C. Sriskandarajah ,
and N. Ramanan |
|
Throughput Analysis in Automotive
Paint Shops: A Case Study |
1 |
1 |
J. Li |
|
Productivity of Parallel Production
Lines With Unreliable Machines and Material Handling |
1 |
1 |
T. Freiheit, Y. Koren, and S. J. Hu |
|
Unilateral Fixtures for Sheet-Metal
Parts With Holes . |
1 |
2 |
K. Gopalakrishnan, K. Goldberg, G.
M. Bone, M. J. Zaluzec, R. Koganti, R. Pearson, and P. Deneszczuk |
|
Modeling, Analysis, and
Verification of Optimal Fixturing Design |
1 |
2 |
E. Y. T. Tan, A. S. Kumar, J. Y. H.
Fuh, and A. Y. C. Nee |
|
Optimal Design of Fixture Layout in
Multistation Assembly Processes |
1 |
2 |
P. Kim and Y. Ding |
|
On Quality Functions for Grasp
Synthesis, Fixture Planning, and Coordinated Manipulation |
1 |
2 |
G. Liu, J. Xu, X. Wang, and Z. Li |
|
Stable Transport of Assemblies:
Pushing Stacked Part |
1 |
2 |
J. D. Bernheisel and K. M. Lynch |
|
A Flexible Automatic Test System for
Rotating-Turbine Machinery |
2 |
1 |
L. F. Wang, K. C. Tan, X. D. Jiang,
and Y. B. Chen |
|
Computation of Three-Dimensional
Rigid-Body Dynamics With Multiple Unilateral Contacts Using Time-Stepping and
Gauss–Seidel Methods |
2 |
1 |
T. Liu and M. Y. Wang |
|
Automated Generation of Assembly
System-Design Solutions |
2 |
1 |
R. F. Webbink and S. J. Hu |
|
Overlapping Decomposition: A
System-Theoretic Method for Modeling and Analysis of Complex Manufacturing
Systems |
2 |
1 |
J. Li |
|
Strategic Sourcing and Collaborative
Planning in Internet-Enabled Supply Chain Networks Producing Multigeneration
Product |
2 |
1 |
R. S. Gaonkar and N. Viswanadham |
|
Artificial-Intelligence
Approach for Biomedical Sample Characterization Using Raman Spectroscopy |
2 |
1 |
Z. Ye |
|
An Efficient Search Method for
Job-Shop Scheduling Problems |
2 |
1 |
L. Shi and Y. Pan |
|
A Tight Flow Control for Job-Shop
Fabrication Lines With Finite Buffers |
2 |
1 |
H. Toba |
|
Throughput Gain With Parallel Flow
in Automated Flow Lines |
2 |
1 |
M.-K. Jeong, M. Perry, and C. Zhou |
|
On Computation of State Avoidance
Control for Infinite State Systems in Assignment Program Framework |
2 |
1 |
R. Kumar and V. K. Garg |
|
A Characterization of Diagnosability
Conditions for Variance Components Analysis in Assembly Operations |
2 |
2 |
D. W. Apley and Y. Ding |
|
A Robotic Mechanism for Grasping
Sacks |
2 |
2 |
H. Kazerooni and C. Foley |
|
Improving the Performance of
Globalized Dual Heuristic Programming for Fault Tolerant Control Through an
Online Learning Supervisor |
2 |
2 |
G. G. Yen and P. G. DeLima |
|
Modeling and Performance Evaluation
of Supply Chains Using Batch Deterministic and Stochastic Petri Nets |
2 |
2 |
H. Chen, L. Amodeo, F. Chu, and K.
Labadi |
|
A Lagrangian Relaxation Based
Approach to Schedule Asset Overhaul and Repair Services |
2 |
2 |
P. B. Luh, D. Yu, S. Soorapanth, A.
I. Khibnik, and R. Rajamani |
|
Dynamically Optimal Policies for
Stochastic Scheduling Subject to Preemptive-Repeat Machine Breakdowns |
2 |
2 |
X. Cai, X. Wu, and X. Zhou |
|
Multi-Degree Cyclic Scheduling of
Two Robots in a No-Wait Flowshop |
2 |
2 |
A. Che and C. Chu |
|
The Path Method for Analyzing
Mobility and Constraint of Mechanisms and Assemblies |
2 |
2 |
G. Shukla and D. E. Whitney |
|
Development of a New Variable Remote
Center Compliance (VRCC) With Modified Elastomer Shear Pad (ESP) for
Robot Assembly |
2 |
2 |
S. Lee |
|
Effective Approaches for Low
Temperature Polysilicon TFT LCD Post-Mapping Yield Control Problem |
2 |
2 |
C.-T. Su, P.-S. Wang,
and C.-C. Hsu |
|
Ontology-Based Exchange of Product
Data Semantics |
2 |
3 |
L. Patil, D. Dutta, and R. Sriram |
|
Analysis and Design of a Novel
Hydraulic Power Source for Mobile Robots |
2 |
3 |
J. W. Raade and H. Kazerooni |
|
A Frequency-Domain Approach to
Determining the Path Separation for Spray Coating |
2 |
3 |
S. Duncan, P. Jones, and P.
Wellstead |
|
Tool Path Planning for Compound
Surfaces in Spray Forming Processes |
2 |
3 |
W. Sheng, H. Chen, N. Xi, and Y.
Chen |
|
Integrated Synthesis of Assembly and
Fixture Scheme for Properly Constrained Assembly |
2 |
3 |
B. Lee and K. Saitou |
|
Machine Learning Approach for
Determining Feasible Plans of a Remanufacturing System |
2 |
3 |
C. Song, X. Guan, Q. Zhao, and Y.-C.
Ho |
|
Minimizing Staircase Errors in the
Orthogonal Layered Manufacturing System |
2 |
3 |
Y. Yang, J. Y. H. Fuh, H. T. Loh,
and Y. S. Wong |
|
Relative Value Function
Approximation for the Capacitated Re-Entrant Line Scheduling Problem |
2 |
3 |
J. Y. Choi and S. Reveliotis |
|
Repositioning of a Rigid Body With a
Flexible Sheet and Its Application to an Automated Rehabilitation Bed |
2 |
3 |
B. Roy, A. Basmajian, and H. H.
Asada |
|
Complex-Valued Token Petri Nets |
2 |
4 |
A. A. Desrochers, T. J. Deal, and M.
P. Fanti |
|
An Extended Event Graph With
Negative Places and Tokens for Time Window Constraints |
2 |
4 |
T.-E. Lee and S.-H. Park |
|
Control of Markov Chains With Safety
Bounds |
2 |
4 |
A. Arapostathis, R. Kumar, and S. P.
Hsu |
|
Dual Constrained Single Machine
Sequencing to Minimize Total Weighted Completion Time |
2 |
4 |
Y. Pan and L. Shi |
|
A Generic Deviation-Based Approach
for Synthesis of Tolerances |
2 |
4 |
N. Pramanik, U. Roy, R. Sudarsan, R.
D. Sriram, and K. W. Lyons |
|
How to Reach the Dynamic Limits of
Parallel Robots? An Autonomous Control Approach |
2 |
4 |
I. T. Pietsch, M. Krefft, O. T.
Becker, C. C. Bier, and J. Hesselbach |
|
Paint Deposition Modeling for
Trajectory Planning on Automotive Surfaces |
2 |
4 |
D. C. Conner, A. Greenfield,
P. N. Atkar, A. A. Rizzi, and H. Choset |
|
Development of an Automatic Mold
Polishing System |
2 |
4 |
M. J. Tsai, J.-L. Chang,
and J.-F. Haung |
|
Multi-Depot Vehicle Routing Problem:
A One-Stage Approach |
2 |
4 |
A. Lim and F. Wang |
|
Optimizing Picking Operations on
Dual-Head Placement Machines |
3 |
1 |
W. E. Wilhelm, I. Arambula, and N.
N. D. Choudhry |
|
Exact Algorithms for Single Frame
Selection on Multiaxis Satellites |
3 |
1 |
D. Song, A. F. van der Stappen, and
K. Goldberg |
|
Modeling, Analysis, Synthesis, and
Performance Evaluation of Multioperational Production Systems With Hybrid
Timed Petri Nets |
3 |
1 |
G. J. Tsinarakis, N. C.
Tsourveloudis, and K. P. Valavanis |
|
Diagnosis of Repeated Failures for
Discrete Event Systems With Linear-Time Temporal-Logic Specifications |
3 |
1 |
S. Jiang and R. Kumar |
|
An SPC Monitoring System for
Cycle-Based Waveform Signals Using Haar Transform |
3 |
1 |
S. Zhou, B. Sun, and J. Shi |
|
An Approach to Minimize Build Errors
in Direct Metal Laser Sintering |
3 |
1 |
Y. Ning, Y. S. Wong, J. Y. H. Fuh,
and H. T. Loh |
|
A Scheme for Mapping Tolerance
Specifications to Generalized Deviation Space for Use in Tolerance
Synthesis and Analysis |
3 |
1 |
H. Wang, N. Pramanik, U. Roy, R.
Sudarsan, R. D. Sriram, and K. W. Lyons |
|
Generating Variational Geometry of a
Hole With Composite Tolerances |
3 |
1 |
Y. S. Liu and S. M. Gao |
|
Computational Thermal Fluid Models
for Design of a Modern Fiber Draw Process |
3 |
1 |
K.-M. Lee, Z. Wei, Z. Zhou, and
S.-P. Hong |
|
Modeling by Numerical Reduction of
Modes for Multivariable Control of an Optical-Fiber Draw Process Editorial Special Issue on Life
Science Automation |
3 3 |
1 2 |
K.-M. Lee, Z. Wei, and Z. Zhou Mingjuan Zhang, Robin A. Felder Eun Sok Kim, Bradley Nelson,
Beth L. Pruitt, Yuan F. Zheng, Deidre E Meldrum |
|
A Real-Time PCR Analyzer Compatible
With High-Throughput Automated Processing of 2- Reactions in Glass
Capillaries |
3 |
2 |
P. N. Ngatchou, M. R. Holl, C. H.
Fisher, |
|
In Situ DNA Synthesis on Glass
Substrate for Microarray Fabrication Using Self-Focusing Acoustic Transducer |
3 |
2 |
J. W. Kwon, S. Kamal-Bahl, and E. S.
Kim |
|
Dynamics Modeling and Analysis of
Inkjet Technology-Based Oligo DNA Microarray Spotting |
3 |
2 |
M. Zhang, O. Ma, and X. Diao |
|
Automated Multiparametric Platform
for High-Content and High-Throughput Analytical Screening on Living Cells |
3 |
2 |
T. Geisler, J. Ressler, H. Harz, B.
Wolf, and R. Uhl |
|
Lab Automation in Cultivation of
Adherent Cells |
3 |
2 |
J. Kuncová-Kallio and P. Kallio |
|
Automated Liquid Dispensing Pin for
DNA Microarray Applications Editorial Recent Development in
Nanoscale Manipulation and Assembly |
3 3 |
2 3 |
T. N. Chang, S. Parthasarathy, T.
Wang, K. Gandhi, and P. Soteropoulos |
|
Drift Compensation for Automatic
Nanomanipulation With Scanning Probe Microscopes |
3 |
3 |
B. Mokaberi and A. A. G. Requicha |
|
CAD-Guided Automated Nanoassembly
Using Atomic Force Microscopy-Based Nonrobotics |
3 |
3 |
H. Chen, N. Xi, and G. Li |
|
Development of an Automated
Microspotting System for Rapid Dielectrophoretic Fabrication of Bundled
Carbon Nanotube Sensors |
3 |
3 |
K. W. C. Lai, C. K. M. Fung, V. T.
S. Wong, M. L. Y. Sin, W. J. Li, and C.-P. Kwong |
|
Towards Nanotube Linear Servomotors |
3 |
3 |
L. Dong, B. J. Nelson, T. Fukuda,
and F. Arai |
|
Automated CAD/CAM-Based
Nanolithography Using a Custom Atomic Force Microscope |
3 |
3 |
M. S. Johannes, J. F. Kuniholm, D.
G. Cole, and R. L. Clark |
|
Task-Based and Stable
Telenanomanipulation in a Nanoscale Virtual Environment |
3 |
3 |
S.-G. Kim and M. Sitti |
|
A Novel Design and Analysis of a
2-DOF Compliant Parallel Micromanipulator for Nanomanipulation |
3 |
3 |
Y. Li and Q. Xu |
|
Understanding and Harnessing
Biomimetic Molecular Machines for NEMS Actuation Materials |
3 |
3 |
T. J. Huang, A. H. Flood, B. Brough,
Y. Liu, P. A. Bonvallet, S. Kang, C.-W. Chu, T.-F. Guo, W. Lu, Y. Yang, J.
Fraser Stoddart, and C.-M. Ho |
|
Microscale Hybrid Devices Powered by
Biological Flagellar Motors |
3 |
3 |
S. Tung and J. W. Kim |
|
Control of a Particular Micro–Macro
Positioning System Applied to Cell Micromanipulation |
3 |
3 |
M. Gauthier and E. Piat |
|
Constructing Minimum
Deflection Fixture Arrangements Using Frame Invariant Norms |
3 |
3 |
Q. Lin, J. W. Burdick, and E. Rimon |
|
Real-Time Operating Environment for
Networked Control Systems |
3 |
3 |
W. Kim, K. Ji, and A. Ambike |
|
STEP-NC and Function Blocks for
Interoperable Manufacturing |
3 |
3 |
X. W. Xu, L. Wang, and Y. Rong |
|
Robust Supervisory Control for
Production Systems With Multiple Resource Failures |
3 |
3 |
S. F. Chew and M. A. Lawley |
|
A Systematic Approach to Design and
Operation of Disassembly Lines |
3 |
3 |
Y. Tang and M. Zhou |
|
Modeling, Scheduling, and
Performance Evaluation for Wafer Fabrication: A Queueing Colored Petri-Net
and GA-Based Approach |
3 |
3 |
T.-C. Chiang, A.-C. Huang, and L.-C. Fu |
|
Editorial Special Section on
Distributed Sensing for Quality and Productivity Improvement |
3 |
4 |
Yu Ding, Jianjun Shi |
|
Distributed Sensing for Quality and
Productivity Improvements |
3 |
4 |
Y. Ding, E. A. Elsayed, S. Kumara, J.-C. Lu, F. Niu, and J. Shi |
|
Semidefinite Programming
Approaches for Sensor Network Localization With Noisy Distance Measurements |
3 |
4 |
P. Biswas, T.-C. Liang, K.-C. Toh,
Y. Ye, and T.-C. Wang |
|
The Sensor Selection Problem for
Bounded Uncertainty Sensing Models |
3 |
4 |
V. Isler and R. Bajcsy |
|
An Automated Feature Selection
Method for Visual Inspection Systems |
3 |
4 |
H. C. Garcia, J. R. Villalobos, and
G. C. Runger |
|
Stream-of-Variation (SoV)-Based
Measurement Scheme Analysis in Multistation Machining Systems |
3 |
4 |
D. Djurdjanovic and J. Ni |
|
Fault Region Localization: Product
and Process Improvement Based on Field Performance and Manufacturing
Measurements |
3 |
4 |
K. Mannar, D. Ceglarek, F. Niu, and
B. Abifaraj |
|
Integration of Process-Oriented
Tolerancing and Maintenance Planning in Design of Multistation Manufacturing
Processes |
3 |
4 |
.Y. Chen, Y. Ding, J. Jin, and D.
Ceglarek |
|
A Minimum-Jerk Speed-Planning
Algorithm for Coordinated Planning and Control of Automated Assembly
Manufacturing |
3 |
4 |
J. S. Gyorfi and C.-H. Wu |
|
A Necessary and Sufficient
Condition for the Liveness and Reversibility of Process-Resource Nets With
Acyclic, Quasi-live, Serializable, and Reversible Process Subnets |
3 |
4 |
S. Reveliotis |
|
The Development of Direct Metallic
Rapid Tooling System |
4 |
1 |
R. C. Luo and J. H. Tzou |
|
Volume Parameterization for Design
Automation of Customized Free-Form Products |
4 |
1 |
C. C. L. Wang,K.-C.
Hui, and K.-M. Tong |
|
Diagnosis of Sheet Metal Stamping
Processes Based on 3-D Thermal Energy Distribution |
4 |
1 |
Y.-M. H. Ng, M. Yu, Y. Huang, and R.
Du |
|
Online Fault Diagnosis of Discrete
Event Systems. A Petri Net-Based Approach |
4 |
1 |
A. Ramírez-Trevińo, E. Ruiz-Beltrán,
I. Rivera-Rangel, and E. López-Mellado |
|
Effects of Classification
Methods on Color-Based Feature Detection With Food Processing Applications |
4 |
1 |
K.-M. Lee, Q. Li, and W. Daley |
|
Grasping Optimization Using a
Required External Force Se |
4 |
1 |
T. Watanabe and T. Yoshikawa |
|
Design of Multiunit Electronic
Exchanges Through Decomposition |
4 |
1 |
P. Dayama and Y. Narahari |
|
Manufacturing System Design to
Improve Quality Buy Rate: An Automotive Paint Shop Application Study |
4 |
1 |
J. Li, D. E. Blumenfeld, and S. P.
Marin |
|
Social Foraging Theory for Robust
Multiagent System Design |
4 |
1 |
B. W. Andrews, K. M. Passino, and T.
A. Waite |
|
A Case Study on Integrated
Production Planning and Scheduling in a Three-Stage Manufacturing System |
4 |
1 |
H.-S. Yan and X.-D. Zhang |
|
A Small Model Theorem for
Bisimilarity Control Under Partial Observation |
4 |
1 |
C. Zhou and R. Kumar |
|
A Resource Allocation Algorithm for
Multivehicle Systems With Nonholonomic Constraints |
4 |
1 |
S. Rathinam, R. Sengupta, and S.
Darbha |
|
On the Use of UML for Modeling
Mechatronic Systems. |
4 |
1 |
C. Secchi, M. Bonfe, and C. Fantuzzi |
|
Diagnosis of DES With Petri Net
Models |
4 |
1 |
D. Lefebvre and C. Delherm |
|
Automated Pipe Defect Detection and
Categorization Using Camera/Laser-Based Profiler and Artificial
Neural Network |
4 |
1 |
O. Duran, K. Althoefer, and L. D.
Seneviratne |
|
High-Throughput Automated System for
Crystallizing Membrane Proteins in Lipidic Mesophases |
4 |
2 |
A. Peddi, L. Muthusubramaniam, Y. F.
Zheng, V. Cherezov, Y. Misquitta, and M. Caffrey |
|
Kinematic Analysis of Dimensional
Variation Propagation for Multistage Machining Processes With General Fixture
Layouts |
4 |
2 |
J.-P Loose, S. Zhou, and D. Ceglarek |
|
Exploiting Phase Fluctuations to
Improve Machine Performance Monitoring |
4 |
2 |
S. Venugopal, R. A. Wagstaff, and J.
P. Sharma |
|
Event-Condition-Action Systems for
Reconfigurable Logic Control |
4 |
2 |
E. E. Almeida, Jonathan E. Luntz,
and D. M. Tilbury |
|
A Multiresolution Analysis-Assisted
Reinforcement Learning Approach to Run-by-Run Contro |
4 |
2 |
R. Ganesan, T. K. Das, and K. M.
Ramachandran |
|
Automatic Control Sequence
Generation for a Hybrid Disassembly System |
4 |
2 |
H.-J. Kim, R. Harms, and G. Seliger |
|
Distributed Diagnosis of
Place-Bordered Petri Nets |
4 |
2 |
S. Genc and S. Lafortune |
|
Penalty Function-Based Two-Level
Hybrid Shop Floor Control System |
4 |
2 |
X. Zhao and Y.-J. Son |
|
Polynomial Algorithms for
Single-Item Lot-Sizing Models With Bounded Inventory and Backlogging or
Outsourcing |
4 |
2 |
F. Chu and C. Chu |
|
Algebraic Structure and Geometric
Interpretation of Rigid Complex Fixture Systems |
4 |
2 |
Y. Xiong and X. Xiong |
|
Analytical Framework for the
Management of Risk in Supply Chains |
4 |
2 |
R. S. Gaonkar and N. Viswanadham |
|
Fast Nesting of 2-D Sheet Parts With
Arbitrary Shapes Using a Greedy Method and Semi-Discrete Representations |
4 |
2 |
H. Ma andC.-C. Liu |
|
Slip Control System for a Deep-Sea
Mining Machine |
4 |
2 |
K. Herzog, E. Schulte, M. A.
Atmanand, and W. Schwarz |
|
An Efficient Approach for the
Calibration of Multiple PTZ Cameras |
4 |
2 |
I.-H. Chen and S.-J. Wang |
|
Auction-Based Mechanisms for
Electronic Procurement |
4 |
3 |
T. S.Chandrashekar, Y. Narahari, C.
H. Rosa, D. M. Kulkarni, J. D. Tew, and P. Dayama |
|
Evaluating the Effect of Force
Feedback in Cell Injection |
4 |
3 |
A. Pillarisetti, M. Pekarev, A. D.
Brooks, and J. P. Desai |
|
Band Selection of Hyperspectral
Images for Automatic Detection of Poultry Skin Tumors |
4 |
3 |
Z. Du, M. K. Jeong, and S. G. Kong |
|
Control of Nondeterministic Discrete
Event Systems for Simulation Equivalence |
4 |
3 |
C. Zhou and R. Kumar |
|
Design for Cost: Module-Based Mass
Customization |
4 |
3 |
C. daCunha, B. Agard, and A. Kusiak |
|
Hybrid Design Methodology and
Cost-Effectiveness Evaluation of AGV Transportation Systems |
4 |
3 |
S. Hoshino, J. Ota, A. Shinozaki,
and H. Hashimoto |
|
Cooling an Array of High-Powered
Miniature Robots Using Forced Air Convection |
4 |
3 |
P. Hannoyer, K. Kim, and S. Marte |
|
A Vision-Based Intelligent System
for Packing 2-D Irregular Shapes |
4 |
3 |
A. Bouganis and M. Shanahan |
|
A Production–Inventory Problem for
an Energy Buy-Back Program |
4 |
3 |
Y.Chen, S. P. Sethi, and H. Zhang |
|
Reactive Scheduling of a Distributed
Network for the Supply of Perishable Products |
4 |
3 |
D. Naso, M. Surico, and B. Turchiano |
|
An Incremental Petri Net-Based
Approach to the Modeling of Production Sequences in Manufacturing Systems |
4 |
3 |
A. A.Castelnuovo, L. L. Ferrarini,
and L. L. Piroddi |
|
Multihoist Cyclic Scheduling With
Fixed Processing and Transfer Times |
4 |
3 |
Y. Jiang and J. Liu |
|
Integrating Temporal Logic as a
State-Based Specification Language for Discrete-Event Control Design in
Finite Automata |
4 |
3 |
K. T. Seow |
|
Feature Selection for
Troubleshooting in Complex Assembly Lines |
4 |
3 |
T. Pfingsten, D. J. L.
Herrmann, T. Schnitzler, A. Feustel, and B. Schölkopf |
|
Data-Driven Modeling, Fault
Diagnosis and Optimal Sensor Selection for HVAC Chillers |
4 |
3 |
S. M.Namburu, M. S. Azam, J. Luo, K.
Choi, and K. R. Pattipati |
|
Deadlock Resolution in Automated
Manufacturing Systems With Robots |
4 |
3 |
N. Wu and M. Zhou |
|
Editorial e-Manufacturing in the Semiconductor Industry |
4 |
4 |
J. George ShanThikumar, Chen-Fu
Chien |
|
A Biochip Microarray Fabrication
System Unsing Inkjet Technology |
4 |
4 |
W. Fisher and M. Zhang |
|
Economic Efficiency Analysis
of Wafer Fabrication |
4 |
4 |
R. C. Leachman, S. Ding, and C.-F.
Chien |
|
Queueing Theory for Semiconductor
Manufacturing Systems: A Survey and Open Problems |
4 |
4 |
J. G. Shanthikumar, S. Ding, and M.
T. Zhang |
|
Practical Extensions to Cycle Time
Approximations for the G/G/m-Queue With Applications |
4 |
4 |
J. R. Morrison and D. P. Martin |
|
Expected Response Times for
Closed-Loop Multivehicle AMHS |
4 |
4 |
D. Nazzal and L. F. McGinnis |
|
Hierarchical Capacity Planning With
Reconfigurable Kits in Global Semiconductor Assembly and Test
Manufacturing |
4 |
4 |
M. T. Zhang, S. Niu, S. Deng, Z.
Zhang, Q. Li, and L. Zheng |
|
Efficient Simulation-Based
Composition of Scheduling Policies by Integrating Ordinal Optimization With
Design of Experiment |
4 |
4 |
B.-W. Hsieh, C.-H. Chen, and S.-C. Chang |
|
Bottleneck Station Scheduling in
Semiconductor Assembly and Test Manufacturing Using Ant Colony Optimization |
4 |
4 |
Y. Song, M. T. Zhang, J. Yi, L.
Zhang, and L. Zheng |
|
A Lot Dispatching Strategy
Integrating WIP Management and Wafer Start Control |
4 |
4 |
Z. Wang, Q. Wu, and F. Qiao |
|
A Petri-Net Approach to Modular
Supervision With Conflict Resolution for Semiconductor Manufacturing
Systems |
4 |
4 |
J. S. Lee, M. C. Zhou, and P. L. Hsu |
|
Reticle Design for Minimizing
Multiproject Wafer Production Cost |
4 |
4 |
R.-B. Lin, M.-C. Wu,
and S.-C. Tsai |
|
Editorial Home Automation as a Means
of Independent Living |
5 |
1 |
Chris D. Nugent, Dewar D. Finlay,
Paolo Fiorini, Yuichi Tsumaki, Erwin Prassler |
|
Inhabitants Tracking System in a
Cluttered Home Environment Via Floor Load Sensors |
5 |
1 |
W.-H. Liau, C.-L. Wu,
and L.-C. Fu |
|
A Steward Robot for Human-Friendly
Human-Machine Interaction in a Smart House Environment |
5 |
1 |
K.-H. Park, H.-E. Lee, Y. Kim, and
Z. Z. Bien |
|
Robust Environmental Sound
Recognition for Home Automation |
5 |
1 |
J.-C. Wang, H.-P. Lee, J.-F. Wang, and C.-B. Lin |
|
A New Approach for Measuring
Single-Cell Oxygen Consumption Rates |
5 |
1 |
T. W. Molter, M. R. Holl, J. M.
Dragavon, S. C. McQuaide, J. B. Anderson, A. C. Young, L. W. Burgess, M. E.
Lidstrom, and D. R. Meldrum |
|
A New Methodology for Modeling,
Analysis, Synthesis, and Simulation of Time-Optimal Train Traffic in
Large Networks |
5 |
1 |
Y. Bavafa-Toosi, C. Blendinger, V.
Mehrmann, A. Steinbrecher, and R. Unger |
|
Integrated Supervisory and
Operational Control of a Warehouse With a Matrix-Based Approach |
5 |
1 |
V. Giordano, J. B. Zhang, D. Naso,
and F. Lewis |
|
Adaptive Neuro-Fuzzy Inference
System Modeling of MRR and WIWNU in CMP Process With Sparse Experimental Data |
5 |
1 |
W.-C. Lih, S. T. S. Bukkapatnam, P.
Rao, N. Chandrasekharan, and R. Komanduri |
|
Control Reconfiguration of
Discrete Event Systems With Dynamic Control Specifications |
5 |
1 |
R. Sampath, H. Darabi, U. Buy, and
J. Liu |
|
Prioritized Synchronization Under
Mask for Control and Interaction of Partially Observed Event-Driven Systems |
5 |
1 |
C. Zhou and R. Kumar |
|
Generation of STEP AP214 Models From
Discrete Event Systems for Process Planning and Control |
5 |
1 |
P. Falkman, J. Nielsen, B.
Lennartson, and A. von Euler Chelpin |
|
An Intelligent Online Monitoring and
Diagnostic System for Manufacturing Automation |
5 |
1 |
M. Ge, Y. Xu, and R. Du |
|
Vision-Based Online Process Control
in Manufacturing Applications |
5 |
1 |
Y. Cheng and M. A. Jafar |
|
A Neural Network Degradation Model
for Computing and Updating Residual Life Distributions |
5 |
1 |
N. Z. Gebraeel and M. A. Lawley |
|
Characteristic Equation-Based
Dynamics Analysis of Vibratory Bowl Feeders With Three Spatial Compliant Legs |
5 |
1 |
X. Ding and J. S. Dai |
|
Automatic Scratching Pattern
Detection for Laboratory Mice Using High-Speed Video Images |
5 |
1 |
I. Ishii, S. Kurozumi, K. Orito, and
H. Matsuda |
|
A Maximally Permissive Deadlock
Prevention Policy for FMS Based on Petri Net Siphon Control and the Theory of
Regions |
5 |
1 |
Zhiwu Li and Mengchu Zhou |
|
Coordinated Logistics Scheduling for
In-House Production and Outsourcing |
5 |
1 |
X. Qi |
|
Compensation of Scanner Creep and
Hysteresis for AFM Nanomanipulation |
5 |
2 |
B. Mokaberi and A. A. G. Requicha |
|
Fiber Assembly of MEMS Optical
Switches With U-Groove Channels |
5 |
2 |
W. J. Chen and W. Lin |
|
A Novel Multipin Positioning System
for the Generation of High-Resolution 3-D Profiles by Pin-Arrays |
5 |
2 |
N. J.Cook, G. F. Smith, and S. J.
Maggs |
|
Randomized Optimal Design of
Parallel Manipulators |
5 |
2 |
Y. Lou, G. Liu, and Z. L |
|
A Dynamic Multiagent System Based on
a Negotiation Mechanism for Product Family Design |
5 |
2 |
S. K. Moon, J. Park, T. W. Simpson,
and S. R. T. Kumara |
|
Group Elevator Scheduling With
Advance Information for Normal and Emergency Modes |
5 |
2 |
P. B. Luh, B. Xiong, and S.-C. Chang |
|
An Augmented Lagrangian Approach for
Distributed Supply Chain Planning for Multiple Companies |
5 |
2 |
T.Nishi, R. Shinozaki, and M.
Konishi |
|
Analysis of Admission and Inventory
Control Policies for Production Networks |
5 |
2 |
S. Ioannidis, V. S. Kouikoglou, and
Y. A. Phillis |
|
Effective Neighborhood Operators for
Solving the Flexible Demand Assignment Problem |
5 |
2 |
F. Wang and A. Lim |
|
Lean Buffering in Serial Production
Lines With Nonidentical Exponential Machines |
5 |
2 |
S.-Y. Chiang, A. B. Hu, and S. M.
Meerkov |
|
Steady-State Control Reference and
Token Conservation Laws in Continuous Petri Net Systems |
5 |
2 |
C. Mahulea, A. Ramírez-Trevińo, L.
Recalde, and M. Silva |
|
Steady-State Throughput and
Scheduling Analysis of Multicluster Tools: A Decomposition Approach |
5 |
2 |
J. Yi, S. Ding, D. Song, and M. T.
Zhang |
|
New Hybrid Optimization Algorithms
for Machine Scheduling Problems |
5 |
2 |
Y. Pan and L. Shi |
|
New Solution Approaches to the
General Single- Machine Earliness-Tardiness Problem |
5 |
2 |
H. Yau, Y. Pan, and L. Shi |
|
Automatic Inspection of Transmission
Devices Using Acoustic Data |
5 |
2 |
B. Wang, T. Fujinaka, S. Omatu, and
T. Abe |
|
Navigating a Miniature Crawler Robot
for Engineered Structure Inspection |
5 |
2 |
W. Sheng, H. Chen, and N. Xi |
|
Mechanism Design for Single Leader
Stackelberg Problems and Application to Procurement Auction Design |
5 |
3 |
D. Garg and Y. Narahari |
|
An Optimization-Based Approach for
Design Project Scheduling |
5 |
3 |
M. Ni, P. B. Luh, and B. Moser |
|
On Clamping Planning in
Workpiece-Fixture Systems |
5 |
3 |
C.-H. Xiong, M. Y. Wang, and Y.-L.
Xiong |
|
Control Mechanism Analysis of
Small-Agent Networks Using a Distinguished Node Model for Urban Traffic
Controls |
5 |
3 |
Z. Li, D. Sun, Z. Zhang, J. Song,
and D. Xiao |
|
Modeling and Supervisory Control of
Railway Networks Using Petri Nets |
5 |
3 |
A. Giua and C. Seatzu |
|
Microassembly Fabrication of Tissue
Engineering Scaffolds With Customized Design |
5 |
3 |
H. Zhang, E. Burdet, A. N. Poo, and
D. W. Hutmacher |
|
Octree-Based Production of Near Net
Shape Components |
5 |
3 |
H. Medellín, J. Corney, J. B. C.
Davies, T. Lim, and J. M. Ritchie |
|
A Kinematic Model of Finger Gaits by
Multifingered Hand as Hybrid Automaton |
5 |
3 |
J. Xu and Z. Li |
|
Fault Detection, Isolation, and
Accommodation Control in Robotic Systems |
5 |
3 |
S. N. Huang and K. K. Tan |
|
Schedulability Analysis of
Time-Constrained Cluster Tools With Bounded Time Variation by an Extended
Petri Net |
5 |
3 |
J.-H. Kim and T.-E. Lee |
|
Stochastic Modeling of an Automated
Guided Vehicle System With One Vehicle and a Closed-Loop Path |
5 |
3 |
A. F. Kahraman, A. Gosavi, and K. J.
Oty |
|
A Structure Property of Optimal
Policies for Maintenance Problems With Safety-Critical Components |
5 |
3 |
L. Xia, Q. Zhao, and Q.-S. Jia |
|
On Observability and Design of
Observers in Timed Continuous Petri Net Systems |
5 |
3 |
J. Júlvez, E. Jiménez, L. Recalde,
and M. Silva |
|
Optimal Vibratory Stick-Slip
Transport |
5 |
3 |
P. Umbanhowar and K. M. Lynch |
|
Color-Coating Production Scheduling
for Coils in Inventory in Steel Industry |
5 |
3 |
L. Tang, X. Wang, and J. Liu |
|
Anti-Swinging Input Shaping Control
of an Automatic Construction Crane |
5 |
3 |
S. Garrido, M. Abderrahim, A.
Giménez, R. Diez, and C. Balaguer |
|
Identification of
Influential Functional Process Variables for Surface Quality Control in
Hot Rolling Processes |
5 |
3 |
N. Jin, S. Zhou, T.-S. Chang, and H. H.-H. Huang |
|
Toward Autonomous Excavation of
Fragmented Rock: Full-Scale Experiments |
5 |
3 |
J. A. Marshall, P. F. Murphy, and L.
K. Daneshmend |
|
Supply Chain Management by
H-Infinity Control |
5 |
4 |
M. Boccadoro, F. Martinelli, and P.
Valigi |
|
Local Dynamic Stability Assessment
of Motion Impaired Elderly Using Electronic Textile Pants |
5 |
4 |
J. Liu, T. E. Lockhart, M. Jones,
and T. Martin |
|
Automated Planning and Optimization
of Lumber Production Using Machine Vision and Computed Tomography |
5 |
4 |
S. M. Bhandarkar, X. Luo, R. F.
Daniels, and E. W. Tollner |
|
A Petri Net-Based Heuristic
Algorithm for Realizability of Target Refining Schedule for Oil
Refinery |
5 |
4 |
N. Wu, M. Zhou, and F. Chu |
|
Sensor Selection in Arbitrary
Dimensions |
5 |
4 |
V.Isler and M. Magdon-Ismail |
|
An Assessment of PLC Software
Structure Suitability for the Support of Flexible Manufacturing Processes |
5 |
4 |
V. Hajarnavis and K. Young |
|
Market-Based Model Predictive
Control for Large-Scale Information Networks: Completion Time and Value of
Solution |
5 |
4 |
S. Lee, S. Kumara, and N. Gautam |
|
Directed Control of Discrete Event
Systems for Safety and Nonblocking |
5 |
4 |
J. Huang and R. Kumar |
|
Optimization of Joint Replacement
Policies for Multipart Systems by a Rollout Framework |
5 |
4 |
T. Sun, Q. Zhao, P. B. Luh, and R.
N. Tomastik |
|
Design of Stochastic Distribution
Networks Using Lagrangian Relaxation |
5 |
4 |
G.-A. Tanonkou, L. Benyoucef, and X.
Xie |
|
A Tax Integrated Approach for Global
Supply Chain Network Planning |
5 |
4 |
K. Balaji and N. Viswanadham |
|
Hybrid Nested Partitions and
Mathematical Programming Approach and Its Applications |
5 |
4 |
L. Pi, Y. Pan, and L. Shi |
|
Guest Editorial Special Section on
RFID |
6 |
1 |
Sanjay Sarma, Marlin H. Mickle,
Duncan McFarlane, eter Cole, Daniel W. Engels |
|
The In-Situ Technique for Measuring
Input Impedance and Connection Effects of RFID Tag Antenna |
6 |
1 |
L. Mats, J. T. Cain, and M. H.
Mickle |
|
An Accurate Tag Estimate Method for
Improving the Performance of an RFID Anticollision Algorithm Based on Dynamic
Frame Length ALOHA |
6 |
1 |
W.-T. Chen |
|
An Optimal Q-Algorithm for the ISO
18000-6C RFID Protocol |
6 |
1 |
Y. Maguire and R. Pappu |
|
Active RFID System With
Spread-Spectrum Transmission |
6 |
1 |
G. Mazurek |
|
RFIDSim—A Physical and Logical Layer
Simulation Engine for Passive RFID |
6 |
1 |
C. Floerkemeier and S. Sarma |
|
Direction Sensing RFID Reader for
Mobile Robot Navigation |
6 |
1 |
M. Kim and N. Y. Chong |
|
3-D Tag-Based RFID System for
Recognition of Object |
6 |
1 |
S.-G. Roh and H. R. Choi |
|
Passive UHF RFID in Paper Industry:
Challenges, Benefits and the Application Environment |
6 |
1 |
A. Lehto, J. Nummela, L. Ukkonen, L.
Sydänheimo, and M. Kivikoski |
|
Analysis of Rigid Body Interactions
for Compliant Motion Tasks Using the Grassmann–Cayley Algebra |
6 |
1 |
E. Staffetti |
|
A Petri Net-Based Method for
Compatibility Analysis and Composition of Web Services in Business Process
Execution Language |
6 |
1 |
W. Tan, Y. Fan, and M. Zhou |
|
Hierarchical Segmentation of
Piecewise Pseudoextruded Surfaces for Uniform Coverage |
6 |
1 |
P. N. Atkar, D. C. Conner, A.
Greenfield, H. Choset, and A. A. Rizzi |
|
Efficient Determination of
Four-Point Form-Closure Optimal Constraints of Polygonal Objects |
6 |
1 |
J. Cornellŕ and R. Suárez |
|
Regularity Analysis for Patterned
Texture Inspection |
6 |
1 |
H. Y. T. Ngan and G. K. H. Pang |
|
Contrast Enhancement and Intensity
Preservation for Gray-Level Images Using MultiobjectiveParticle Swarm
Optimization |
6 |
1 |
N. M. Kwok, Q. P. Ha, D. Liu, and G.
Fang |
|
Automatic Reconfiguration of
Petri Net Controllers for Reconfigurable Manufacturing Systems With an
Improved Net Rewriting System-Based Approach |
6 |
1 |
J. Li, X. Dai, and Z. Meng |
|
Closed Bernoulli Production Lines:
Analysis, Continuous Improvement, and Leanness |
6 |
1 |
S. Biller, S. P. Marin, S. M.
Meerkov, and L. Zhang |
|
Brightness-Based Selection and Edge
Detection-Based Enhancement Separation Algorithm for Low-Resolution Metal
Transfer Images |
6 |
1 |
Z. Z. Wang and Y. Zhang |
|
An Efficient Approach for
Dynamic Calibration of Multiple Cameras |
6 |
1 |
I.-H. Chen and S.-J. Wang |
|
Robust Supervisory Control for
Product Routings With Multiple Unreliable Resources |
6 |
1 |
S. F. Chew, S. Wang, and M. A.
Lawley |
|
Guest Editorial Special Section on
Drug Delivery Automation |
6 |
2 |
Deirde R. Meldrum, Mingjun Zhang,
Liwei Lin, Channing R. Robertson, T.C. Yih, Chingming WEi |
|
Flow Diversion Strategies for Routing
in Integrated Automatic Shipment Handling Systems |
6 |
2 |
Mo, Daniel; Cheung, Raymond; Lee,
Allen; Law, Gil |
|
An Open CNC System Based on
Component Technology |
6 |
2 |
Yu, Dong; Hu, Yi; Xu, Xun; Huang,
Yan; Du, Shaohua |
|
Designing Distributed Diagnosers for
Complex Continuous Systems |
6 |
2 |
Roychoudhury, Indranil; Biswas,
Gautam; Koutsoukos, Xenofon |
|
Decentralized Diagnosis of
Event-Driven Systems for Safely Reacting to Failures |
6 |
2 |
Qiu, Wenbin; Wen, Qin; Kumar,
Ratnesh |
|
Bounds on the Number of Markings
Consistent With Label Observations in Petri Nets |
6 |
2 |
Ru, Yu; Hadjicostis, Christoforos |
|
Mł-Deterministic,
Multiscale, Multirobot Platform for Microsystems Packaging: Design and
Quasi-Static Precision Evaluation |
6 |
2 |
Popa, Dan; Rakesh, Murthy; Das,
Aditya |
|
Control of Drug Administration
During Monitored Anesthesia Care |
6 |
2 |
Caruso, Antonello; Bouillon, Thomas;
Schumacher, Peter; Zanderigo, Eleonora; Morari, Manfred |
|
Web Service Configuration Under
Multiple Quality-of-Service Attributes |
6 |
2 |
Xiong, PengCheng; Fan, YuShun; Zhou,
MengChu |
|
Passive Self-Replication of
Millimeter-Scale Parts |
6 |
2 |
Matsumoto, Mitsuharu; Hashimoto,
Shuji |
|
Internal Model Control Based on a
Neurofuzzy System for Network Applications. A Case Study on the
High-Performance Drilling Process |
6 |
2 |
Martin, Agustin; Guerra, Rodolfo |
|
Microsurface Reverse Engineering and
Compensation for Laser Micromachining |
6 |
2 |
Mayyas, Mohammad; Shiakolas, Panos |
|
Activation of Immune Response in
Disease Dynamics via Controlled Drug Scheduling |
6 |
2 |
Chang, Hyeygjeon; Astolfi, Alessandro |
|
Port-of-Entry Inspection: Sensor
Deployment Policy Optimization |
6 |
2 |
Elsayed, Elsayed; Young, Christina;
Xie, Minge; Zhang, Hao; Zhu, Yada |
|
Weighting Restriction for
Intravenous Insulin Delivery on T1DM Patient via H∞ Control |
6 |
2 |
Femat, R; Ruiz-Velazquez, E; Quiroz,
G |
|
Experimental Case Study of a
BACnet-Based Lighting Control System |
6 |
2 |
Park, Tae-Jin; Hong, Seung-Ho |
|
Guest Editorial Solid and Physical
Modeling |
6 |
3 |
Shi-Min Hu, Bruno Levy, Dinesh
Manocha |
|
Automated Refinement of Automated
Visual Inspection Algorithms |
6 |
3 |
Garcia, Hugo; Villalobos, J |
|
Optimal Design of Gear Ratios and
Offset for Energy Conservation of an Articulated Manipulator |
6 |
3 |
Izumi, Teruyuki; Zhou, Hai; Li,
Zuowei |
|
Visual-Based Impedance Control of
Out-of-Plane Cell Injection Systems |
6 |
3 |
Huang, Haibo; Sun, Dong; Mills,
James; Li, Wen; Cheng, Shuk |
|
Meshless Harmonic Volumetric Mapping
Using Fundamental Solution Methods |
6 |
3 |
Li, Xin; Guo, Xiaohu; Wang, Hongyu;
He, Ying; Gu, Xianfeng; Qin, Hong |
|
Automation of Challenging
Spatial-Temporal Biomedical Observations With the Adaptive Scanning Optical
Microscope (ASOM) |
6 |
3 |
Potsaid, Benjamin; Finger, Fern;
Wen, John |
|
Clarification on the Computation of
Liveness-Enforcing Supervisor for Resource Allocation Systems With
Uncontrollable Behavior |
6 |
3 |
Hu, Hesuan; Li, Zhiwu |
|
An Algorithm for Direct
Multiplication of B-Splines |
6 |
3 |
Chen, Xianming; Riesenfeld, Richard;
Cohen, Elaine |
|
Chain-Based Representations for
Solid and Physical Modeling |
6 |
3 |
DiCarlo, Antonio; Milicchio, Franco;
Paoluzzi, Alberto; Shapiro, Vadim |
|
Reachability Graph of Finite and
Deterministic DEVS Networks |
6 |
3 |
Hwang, Moon; Zeigler, Bernard |
|
Reconstruction Algorithms as a
Suitable Basis for Mesh Connectivity Compression |
6 |
3 |
Chaine, Raphaelle; Gandoin,
Pierre-Marie; Roudet, Celine |
|
Cell Contour Tracking and Data
Synchronization for Real-Time, High-Accuracy Micropipette Aspiration |
6 |
3 |
Liu, Xinyu; Wang, Yifei; Sun, Yu |
|
Lift-Gas Allocation Under Precedence
Constraints: MILP Formulation and Computational Analysis |
6 |
3 |
Camponogara, Eduardo; DeConto,
Augusto |
|
Calibrating an Automatic Zoom Camera
With Moving Least Squares |
6 |
3 |
Sarkis, Michel; Senft, Christian;
Diepold, Klaus |
|
A Scale Stretch Method Based on ICP
for 3D Data Registration |
6 |
3 |
Ying, Shihui; Peng, Jigen; Du,
Shaoyi; Qiao, Hong |
|
An Active Zooming Strategy for
Variable Field of View and Depth of Field in Vision-Based Microassembly |
6 |
3 |
Tao, Xiaodong; Janabi-Sharifi,
Farrokh; Cho, Hyungsuck |
|
Molds for Meshes: Computing Smooth
Parting Lines and Undercut Removal |
6 |
3 |
Li, Weishi; Martin, Ralph; Langbein,
Frank |
|
An Exact, Complete and Efficient
Computation of Arrangements of BÉzier Curves |
6 |
3 |
Hanniel, Iddo; Wein, Ron |
|
Inference-Based Ambiguity Management
in Decentralized Decision-Making: Decentralized Diagnosis of Discrete-Event
Systems |
6 |
3 |
Kumar, Ratnesh; Takai, Shigemasa |
|
Guest Editorial Introducing Automation
and Engineering for Ambient Intelligence |
6 |
4 |
Pablo Remagnino, Dorothy N.
Monekosso, Yoshinori Kuno, Mohan Manubhai Trivedi, How-Lung Eng |
|
An Efficient Approach to
Interpreting Rigorous Tolerance Semantics for Complicated Tolerance
Specification |
6 |
4 |
Liu, Yusheng; Gao, Shuming; Cao,
Yaolong |
|
Environmental-Adaptive RSSI-Based
Indoor Localization |
6 |
4 |
Ahn, Hyo-Sung; Yu, Wonpil |
|
Stripification of Free-Form Surfaces
With Global Error Bounds for Developable Approximation |
6 |
4 |
Liu, Yong-Jin; Lai, Yu-Kun; Hu,
Shimin |
|
Intelligent Optimal-Setting Control
for Grinding Circuits of Mineral Processing Process |
6 |
4 |
Zhou, Ping; Chai, Tianyou; Wang,
Hong |
|
Game-Theoretic Modeling of Joint
Topology Control and Power Scheduling for Wireless Heterogeneous Sensor
Networks |
6 |
4 |
Ren, Hongliang; Meng, Max |
|
Design and Implementation of a
Ubiquitous Robotic Space |
6 |
4 |
Yu, Wonpil; Lee, Jae-Yeong; Ha,
Young-Guk; Jang, Minsu; Sohn, Joo-Chan; Kwon, Yong-Moo; Ahn, Hyo-Sung |
|
Robust Location-Aware Activity
Recognition Using Wireless Sensor Network in an Attentive Home |
6 |
4 |
Lu, Ching-Hu; Fu, Li-Chen |
|
Design, Fabrication, and Visual
Servo Control of an XY Parallel Micromanipulator With Piezo-Actuation |
6 |
4 |
Xu, Qingsong; Li, Yangmin; Xi, Ning |
|
An Optimal Mechanism for Sponsored
Search Auctions on the Web and Comparison With Other Mechanisms |
6 |
4 |
Garg, Dinesh; Narahari, Y |
|
Optimality Criteria for Fixture
Layout Design: A Comparative Study |
6 |
4 |
Zhu, Xiangyang; Ding, Han |
|
A Synchronization Approach for the
Minimization of Contouring Errors of CNC Machine Tools |
6 |
4 |
Sun, Dong; Tong, Ming |
|
A First-Order Hybrid Petri Net Model
for Supply Chain Management |
6 |
4 |
Dotoli, Mariagrazia; Fanti, Maria;
Iacobellis, Giorgio; Mangini, Agostino |
|
Active Tuning of Intrinsic Camera
Parameters |
6 |
4 |
Micheloni, Christian; Foresti, Gian |
|
Friction-Induced Lines of Attraction
and Repulsion for Parts Sliding on an Oscillated Plate |
6 |
4 |
Vose, Thomas; Umbanhowar, Paul;
Lynch, Kevin |
|
An Ensemble ELM Based on Modified
AdaBoost.RT Algorithm for Predicting the Temperature of Molten Steel in Ladle
Furnace |
7 |
1 |
Tian, Hui-Xin; Mao, Zhi-Zhong |
|
Geo-Referencing of Video Flow From
Small Low-Cost Civilian UAV |
7 |
1 |
Zhou, Guoqing |
|
Time Windows Based Dynamic Routing
in Multi-AGV Systems |
7 |
1 |
Smolic-Rocak, Nenad; Bogdan,
Stjepan; Kovacic, Zdenko; Petrovic, Tamara |
|
Robust Calibration for Localization
in Clustered Wireless Sensor Networks |
7 |
1 |
Cho, Jung; Ding, Yu; Chen, Yong;
Tang, Jiong |
|
Monitoring of Timed Discrete Events
Systems With Interrupts |
7 |
1 |
Allahham, Adib; Alla, Hassane |
|
Coverage of a Planar Point Set With
Multiple Robots Subject to Geometric Constraints |
7 |
1 |
Chakraborty, Nilanjan; Akella,
Srinivas; Wen, John |
|
Swept Volume Approximation of
Polygon Soups |
7 |
1 |
Himmelstein, Jesse; Ferre, Etienne; Laumond,
Jean-Paul |
|
Modeling the Relationship Between
EDI Implementation and Firm Performance Improvement With Neural Networks |
7 |
1 |
Zhang, G; Hill, Craig; Xia, Yusen;
Liang, Faming |
|
Planning Smooth and
Obstacle-Avoiding B-Spline Paths for Autonomous Mining Vehicles |
7 |
1 |
Berglund, Tomas; Brodnik, Andrej;
Jonsson, Hakan; Staffanson, Mats; Soderkvist, Inge |
|
Prototyping of Beam Shaping
Diffraction Gratings by AFM Nanoscale Patterning |
7 |
1 |
Fok, Lo-Ming; Liu, Yun-Hui; Li, Wen |
|
Physical Modeling of a Bag Knot in a
Robot Learning System |
7 |
1 |
Kartoun, Uri; Shapiro, Amir; Stern,
Helman; Edan, Yael |
|
ASP: An Adaptive Setup Planning
Approach for Dynamic Machine Assignments |
7 |
1 |
Wang, Lihui; Cai, Ningxu; Feng,
Hsi-Yung; Ma, Ji |
|
Process Parameters Optimization: A
Design Study for TiO₂ Thin Film of Vacuum Sputtering Process |
7 |
1 |
Ho, Wen-Hsien; Tsai, Jinn-Tsong;
Hsu, Gong-Ming; Chou, Jyh-Horng |
|
K
Constrained Shortest Path Problem |
7 |
1 |
Shi, Ning |
|
Skill Evaluation of Human Operators
in Partly Automated Mobile Working Machines |
7 |
1 |
Tervo, Kalevi; Palmroth, Lauri;
Koivo, Heikki |
|
Lateral Optical Sensor With Slip
Detection for Locating Live Products on Moving Conveyor |
7 |
1 |
Lee, Kok-Meng; Foong, Shaohui |
|
Neural Network Models to Anticipate
Failures of Airport Ground Transportation Vehicle Doors |
7 |
1 |
Smith, Alice; Coit, David; Liang,
Yun-Chia |
|
Managing Supply Uncertainties
Through Bayesian Information Update |
7 |
1 |
Chen, Min; Xia, Yusen; Wang, Xinlei |
|
Prognostics-Based Identification of
the Top-k Units in a Fleet |
7 |
1 |
Gebraeel, Nagi |
|
Clear and Precise Specification of
Ecological Data Management Processes and Dataset Provenance |
7 |
1 |
Osterweil, Leon; Clarke, Lori;
Ellison, Aaron; Boose, Emery; Podorozhny, Rodion; Wise, Alexander |
|
Intelligent Component-Based
Automation of Baggage Handling Systems With IEC 61499 |
7 |
2 |
Black, Geoff; Vyatkin, Valeriy |
|
Supply Chain With Inventory Review
and Dependent Demand Distributions: Dynamic Inventory Outsourcing |
7 |
2 |
Kogan, Konstantin; Lou, Sheldon;
Tapiero, Charles; Shnaiderman, Matan |
|
Application of Genetic Algorithms to
Solve the Multidepot Vehicle Routing Problem |
7 |
2 |
Lau, H; Chan, T; Tsui, W; Pang, W |
|
Reliability of Coordinate Sensor
Systems Under the Risk of Sensor Precision Degradations |
7 |
2 |
Yang, Qingyu; Chen, Yong |
|
Orchestration of Grid-Enabled
Geospatial Web Services in Geoscientific Workflows |
7 |
2 |
Hobona, Gobe; Fairbairn, David;
Hiden, Hugo; James, Philip |
|
Design of DOE-Based Automatic
Process Controller With Consideration of Model and Observation Uncertainties |
7 |
2 |
Zhong, Jing; Shi, Jianjun; Wu, Jeff |
|
Developing a Stochastic Dynamic
Programming Framework for Optical Tweezer-Based Automated Particle Transport
Operations |
7 |
2 |
Banerjee, Ashis; Pomerance, Andrew;
Losert, Wolfgang; Gupta, Satyandra |
|
State Space Modeling for 3-D
Variation Propagation in Rigid-Body Multistage Assembly Processes |
7 |
2 |
Liu, Jian; Jin, Jionghua; Shi,
Jianjun |
|
Bi-Criteria Scheduling of Scientific
Grid Workflows |
7 |
2 |
Prodan, Radu; Wieczorek, Marek |
|
A Closed-Form Solution for
Schedulability and Optimal Scheduling of Dual-Arm Cluster Tools With Wafer
Residency Time Constraint Based on Steady Schedule Analysis |
7 |
2 |
Wu, NaiQi; Zhou, MengChu |
|
Quick Wafer Alignment Using
Feedforward Neural Networks |
7 |
2 |
Kim, HyungTae; Lee, KangWon; Jeon,
BongKeon; Song, ChangSeop |
|
Optimization of Group Elevator
Scheduling With Advance Information |
7 |
2 |
Sun, Jin; Zhao, Qian-Chuan; Luh,
Peter |
|
Bottlenecks in Bernoulli Serial
Lines With Rework |
7 |
2 |
Biller, Stephan; Li, Jingshan;
Marin, Samuel; Meerkov, Semyon; Zhang, Liang |
|
Deterministic Flow Lines With
Applications |
7 |
2 |
Morrison, James |
|
Surface Patch Reconstruction From “One-Dimensional”
Tactile Data |
7 |
2 |
Jia, Yan-Bin; Tian, Jiang |
|
Hierarchical Production Planning for
Semiconductor Wafer Fabrication Based on Linear Programming and
Discrete-Event Simulation |
7 |
2 |
Bang, June-Young; Kim, Yeong-Dae |
|
Multiobjective Optimization of a
Port-of-Entry Inspection Policy |
7 |
2 |
Young, Christina; Li, Mingyu; Zhu,
Yada; Xie, Minge; Elsayed, Elsayed; Asamov, Tsvetan |
|
Generation of Paths With Minimum
Curvature Derivative With n3-Splines |
7 |
2 |
Bianco, Corrado; Gerelli, Oscar |
|
Cost-Effective Updated Sequential
Predictive Maintenance Policy for Continuously Monitored Degrading Systems |
7 |
2 |
You, Ming-Yi; Li, Lin; Meng, Guang;
Ni, Jun |
|
Correctness Verification of
Generalized Algebraic Deadlock Avoidance Policies Through Mathematical
Programming |
7 |
2 |
Reveliotis, Spyros; Roszkowska,
Elzbieta; Choi, Jin |
|
Fairness, Stability and Optimality
of Adaptive Multiagent Systems: Interaction Through Resource Sharing |
7 |
3 |
Lee, Seokcheon |
|
LaneRuler: Automated Lane Tracking
for DNA Electrophoresis Gel Images |
7 |
3 |
Wong, Richard; Flibotte, Stephane;
Corbett, Richard; Saeedi, Parvaneh; Jones, Steven; Marra, Marco; Schein,
Jacqueline; Birol, Inanc |
|
Constrained Motion Tracking Control
of Piezo-Actuated Flexure-Based Four-Bar Mechanisms for Micro/Nano
Manipulation |
7 |
3 |
Liaw, Hwee; Shirinzadeh, Bijan |
|
Restarting Manufacturing Systems;
Restart States and Restartability |
7 |
3 |
Andersson, Kristin; Lennartson,
Bengt; Fabian, Martin |
|
Automated Selection and Placement of
Single Cells Using Vision-Based Feedback Control |
7 |
3 |
Anis, Yasser; Holl, Mark; Meldrum,
Deirdre |
|
Health-State Estimation and
Prognostics in Machining Processes |
7 |
3 |
Camci, Fatih; Chinnam, Ratna |
|
Algebraic Synthesis of Timed
Supervisor for Automated Manufacturing Systems Using Petri Nets |
7 |
3 |
Hu, Hesuan; Zhou, MengChu; Li, ZhiWu |
|
A Structural Property of Optimal
Policies for Multi-Component Maintenance Problems |
7 |
3 |
Jia, Qing-Shan |
|
Dynamics of WIP Regulation in Large
Production Networks of Autonomous Work Systems |
7 |
3 |
Duffie, Neil; Shi, Leyuan |
|
Collaborative Fixture Design and
Analysis Using Service Oriented Architecture |
7 |
3 |
Fan, Liqing; Jagdish, B; Kumar, A;
Anbuselvan, S; Bok, Shung-Hwee |
|
Embedded System for Hygiene
Compliance Monitoring |
7 |
3 |
Levchenko, Alexander; Hufton,
Graham; Boscart, Veronique; Fernie, Geoff |
|
A Semantic Feature Model in
Concurrent Engineering |
7 |
3 |
Liu, Yong-Jin; Lai, Kam-Lung; Dai,
Gang; Yuen, Matthew |
|
Approximate Analysis of Reentrant
Lines With Bernoulli Reliability Model |
7 |
3 |
Wang, Chong; Li, Jingshan |
|
Causality Assignment and Model
Approximation for Hybrid Bond Graph: Fault Diagnosis Perspectives |
7 |
3 |
Low, Chang; Wang, Danwei; Arogeti,
Shai; Zhang, Jing |
|
Complete Open Loop Control of
Hysteretic, Creeped, and Oscillating Piezoelectric Cantilevers |
7 |
3 |
Rakotondrabe, Micky; Clevy, Cedric;
Lutz, Philippe |
|
A Collaborative Multiagent
Taxi-Dispatch System |
7 |
3 |
Seow, Kiam; Dang, Nam; Lee,
Der-Horng |
|
Automated 3-D Micrograsping Tasks
Performed by Vision-Based Control |
7 |
3 |
Wang, Lidai; Ren, Lu; Mills, James;
Cleghorn, William |
|
Periodic Resource Reallocation in
Two-Echelon Repairable Item Inventory Systems |
7 |
3 |
Lau, Hoong; Pan, Jie; Song, Huawei |
|
A Hybrid Nested Partitions Algorithm
for Banking Facility Location Problems |
7 |
3 |
Xia, Li; Yin, Wenjun; Dong, Jin; Wu,
Teresa; Xie, Ming; Zhao, Yanjia |
|
Sensor Placement for
Triangulation-Based Localization |
7 |
3 |
Tekdas, Onur; Isler, Volkan |
|
An HNP-MP Approach for the
Capacitated Multi-Item Lot Sizing Problem With Setup Times |
7 |
3 |
Wu, Tao; Shi, Leyuan; Duffie, Neil |
|
Autonomous Distributed Control of
Simultaneous Multiple Spacecraft Proximity Maneuvers |
7 |
3 |
McCamish, Shawn; Romano, Marcello;
Yun, Xiaoping |
|
Petri Net Decomposition Approach to
Optimization of Route Planning Problems for AGV Systems |
7 |
3 |
Nishi, Tatsushi; Maeno, Ryota |
|
Data-Driven Service Composition in
Enterprise SOA Solutions: A Petri Net Approach |
7 |
3 |
Tan, Wei; Fan, Yushun; Zhou,
MengChu; Tian, Zhong |
|
A New ANFIS for Parameter Prediction
With Numeric and Categorical Inputs |
7 |
3 |
Liu, Min; Dong, Mingyu; Wu, Cheng |
|
Quantitative Hybrid Bond Graph-Based
Fault Detection and Isolation |
7 |
3 |
Low, Chang; Wang, Danwei; Arogeti,
Shai; Luo, Ming |
|
Decentralized Control of
Discrete-Event Systems With Multiple Local Specifications |
7 |
3 |
Jiang, Shengbing; Kumar, Ratnesh;
Takai, Shigemasa; Qiu, Wenbin |
|
Quality Analysis in Flexible
Manufacturing Systems With Batch Productions: Performance Evaluation and
Nonmonotonic Properties |
7 |
3 |
Wang, Junwen; Li, Jingshan; Arinez,
Jorge; Biller, Stephan; Huang, Ningjian |
|
Manipulation of Thin Objects Using
Levitation Techniques, Tilt Control, and Haptics |
7 |
3 |
Van West, Ewoud; Yamamoto, Akio;
Higuchi, Toshiro |
|
A Dynamic Region-of-Interest Vision
Tracking System Applied to the Real-Time Wing Kinematic Analysis of Tethered
Drosophila |
7 |
3 |
Graetzel, Chauncey; Nelson, Bradley;
Fry, Steven |
|
Formal Specification and
Verification of Industrial Control Logic Components |
7 |
3 |
Ljungkrantz, Oscar; Akesson, Knut;
Fabian, Martin; Yuan, Chengyin |
|
Guest Editorial Automation in Automotive
Manufacturing |
7 |
4 |
Jingshan Li, Masaru Nakano, Wayne
Cal, Kai Furmans, Alain Patchong |
|
Interval Model Control of Consumable
Double-Electrode Gas Metal Arc Welding Process |
7 |
4 |
Li, Kehai; Zhang, YuMing |
|
A Safety Measure for Control Mode
Switching of Skill-Assist for Effective Automotive Manufacturing |
7 |
4 |
Lee, Suwoong; Hara, Susumu; Yamada,
Yoji |
|
Quality/Quantity Improvement in an
Automotive Paint Shop: A Case Study |
7 |
4 |
Arinez, Jorge; Biller, Stephan;
Meerkov, Semyon; Zhang, Liang |
|
Predictive Control Considering Model
Uncertainty for Variation Reduction in Multistage Assembly Processes |
7 |
4 |
Zhong, Jing; Liu, Jian; Shi, Jianjun |
|
Minimize Production Loss in Device
Testing via Condition-Based Equipment Maintenance |
7 |
4 |
Jin, Tongdan; Mechehoul, Mahmoud |
|
Local Capacity H∞ Control for Production Networks of Autonomous Work
Systems With Time-Varying Delays |
7 |
4 |
Karimi, Hamid; Duffie, Neil;
Dashkovskiy, Sergey |
|
Formulation and a Simulation-Based
Algorithm for Line-Side Buffer Assignment Problem in Systems of General
Assembly Line With Material Handling |
7 |
4 |
Yan, Chao-Bo; Zhao, Qianchuan;
Huang, Ningjian; Xiao, Guoxian; Li, Jingshan |
|
Sequence Planning for Integrated
Product, Process and Automation Design |
7 |
4 |
Lennartson, Bengt; Bengtsson,
Kristofer; Yuan, Chengyin; Andersson, Kristin; Fabian, Martin; Falkman,
Petter; Akesson, Knut |
|
Verification of a Timed Multitask
System With Uppaal |
7 |
4 |
Mokadem, Houda; Berard, Beatrice;
Gourcuff, Vincent; De Smet, Olivier; Roussel, Jean-Marc |
|
Diagnosis of Dense-Time Systems
Under Event and Timing Masks |
7 |
4 |
Xu, Songyan; Jiang, Shengbing;
Kumar, Ratnesh |
|
Efficient Simulation Method for
General Assembly Systems With Material Handling Based on Aggregated
Event-Scheduling |
7 |
4 |
Zhao, Yanjia; Yan, Chao-Bo; Zhao,
Qianchuan; Huang, Ningjian; Li, Jingshan; Guan, Xiaohong |
|
A Real-Time Algorithm for
Determining the Optimal Paint Gun Orientation in Spray Paint Applications |
7 |
4 |
From, Pal; Gravdahl, Jan |
|
Low-Cost and High-Performance
Supervision in Ratio-Enforced Automated Manufacturing Systems Using Timed
Petri Nets |
7 |
4 |
Hu, Hesuan; Zhou, MengChu; Li, Zhiwu |
|
Multirobot Coordination for Flexible
Batch Manufacturing Systems Experiencing Bottlenecks |
7 |
4 |
Hoshino, Satoshi; Seki, Hiroya;
Naka, Yuji; Ota, Jun |
|
Variation Analysis of Tooth
Engagement and Loads in Involute Splines |
7 |
4 |
Chase, Kenneth; Sorensen, Carl;
DeCaires, Brian |
|
Process Capability Sensitivity
Analysis for Design Evaluation of Multistage Assembly Processes |
7 |
4 |
Huang, Wenzhen; Kong, Zhenyu |
|
Efficient Estimation and
Collision-Group-Based Anticollision Algorithms for Dynamic Frame-Slotted
ALOHA in RFID Networks |
7 |
4 |
Lin, Chun-Fu; Lin, Frank |
|
Bayesian Tag Estimate and Optimal
Frame Length for Anti-Collision Aloha RFID System |
7 |
4 |
Wu, Haifeng; Zeng, Yu |
|
Product Sequencing With Respect to
Quality in Flexible Manufacturing Systems With Batch Operations |
7 |
4 |
Wang, Junwen; Li, Jingshan; Arinez,
Jorge; Biller, Stephan |
|
Analytic Calculus of Response Time
in Networked Automation Systems |
7 |
4 |
Addad, Boussad; Amari, Said; Lesage,
Jean-Jacques |
|
Two Simple Deadlock Prevention
Policies for SłPR Based on
Key-Resource/Operation-Place Pairs |
7 |
4 |
Liu, GuanJun; Jiang, ChangJun; Zhou,
MengChu |
|
Long-Term Scheduling for Cascaded
Hydro Energy Systems With Annual Water Consumption and Release Constraints |
7 |
4 |
Zhao, Yanjia; Chen, Xi; Jia,
Qing-Shan; Guan, Xiaohong; Zhang, Shuanghu; Jiang, Yunzhong |
|
Behavior Analysis for Assisted
Living |
7 |
4 |
Monekosso, Dorothy; Remagnino, Paolo |
|
Guest Editorial Equipment and
Operations Automation in the Semiconductor Industry |
8 |
1 |
James R. Morrison, Yuseong Daejeon,
Chen-Fu Chien, Stephane Dauzere-Peres, Milind Dwande, Han Ding, Jeffery S.
Pettinato, Jingang Yi |
|
Productivity Improvement From Using
Machine Buffers in Dual-Gripper Cluster Tools |
8 |
1 |
Geismar, Neil; Dawande, Milind;
Sriskandarajah, Chelliah |
|
Spatial Variance Spectrum Analysis
and Its Application to Unsupervised Detection of Systematic Wafer Spatial
Variations |
8 |
1 |
Blue, Jakey; Chen, Argon |
|
Multiclass Flow Line Models of
Semiconductor Manufacturing Equipment for Fab-Level Simulation |
8 |
1 |
Morrison, James |
|
Petri Net-Based Scheduling of
Single-Arm Cluster Tools With Reentrant Atomic Layer Deposition Processes |
8 |
1 |
Wu, NaiQi; Chu, Feng; Chu, Chengbin;
Zhou, MengChu |
|
Artificial Cognition in Production
Systems |
8 |
1 |
Bannat, Alexander; Bautze, Thibault;
Beetz, Michael; Blume, Juergen; Diepold, Klaus; Ertelt, Christoph; Geiger,
Florian; Gmeiner, Thomas; Gyger, Tobias; Knoll, Alois; Lau, Christian; Lenz,
Claus; Ostgathe, Martin; Reinhart, Gunther; Roesel, Wolfgang; Ruehr, Thomas;
Schuboe, Anna; Shea, Kristina; GenanntWersborg, Ingo; Stork, Sonja; Tekouo,
William; Wallhoff, Frank; Wiesbeck, Mathey; Zaeh, Michael |
|
Distributed Optimization for Model
Predictive Control of Linear Dynamic Networks With Control-Input and Output
Constraints |
8 |
1 |
Camponogara, Eduardo; Scherer,
Helton |
|
Excursion Yield Loss and Cycle Time
Reduction in Semiconductor Manufacturing |
8 |
1 |
Leachman, Robert; Ding, Shengwei |
|
Optimal Scheduling of Multicluster
Tools With Constant Robot Moving Times, Part I: Two-Cluster Analysis |
8 |
1 |
Chan, Wai; Yi, Jingang; Ding,
Shengwei |
|
Schedulability Analysis of
Short-Term Scheduling for Crude Oil Operations in Refinery With Oil Residency
Time and Charging-Tank-Switch-Overlap Constraints |
8 |
1 |
Wu, NaiQi; Chu, Chengbin; Chu, Feng;
Zhou, MengChu |
|
WireWarping++: Robust and Flexible
Surface Flattening With Length Control |
8 |
1 |
Zhang, Yunbo; Wang, Charlie |
|
Decision Fusion from Heterogeneous
Sensors in Surveillance Sensor Systems |
8 |
1 |
Gokce, Elif; Shrivastava, Abhishek;
Cho, Jung; Ding, Yu |
|
A Shapley Value-Based Approach to
Discover Influential Nodes in Social Networks |
8 |
1 |
Narayanam, Ramasuri; Narahari,
Yadati |
|
Approximating the Performance of a
Batch Service Queue Using the M/Mᵏ/1
Model |
8 |
1 |
Wu, Kan; McGinnis, Leon; Zwart, Bert |
|
Manufacturing Intelligence to
Exploit the Value of Production and Tool Data to Reduce Cycle Time |
8 |
1 |
Kuo, Chung-Jen; Chien, Chen-Fu;
Chen, Jan-Daw |
|
Automated Detection and
Classification of Non-Wet Solder Joints |
8 |
1 |
Said, Asaad; Bennett, Bonnie; Karam,
Lina; Pettinato, Jeffrey |
|
Optimal Scheduling of Multicluster
Tools With Constant Robot Moving Times, Part II: Tree-Like Topology
Configurations |
8 |
1 |
Chan, Wai; Ding, Shengwei; Yi,
Jingang; Song, Dezhen |
|
Optimal Scheduling of Biochemical
Analyses on Digital Microfluidic Systems |
8 |
1 |
Luo, Lingzhi; Akella, Srinivas |
|
Module Selection and Supply Chain
Optimization for Customized Product Families Using Redundancy and
Standardization |
8 |
1 |
El Hadj Khalaf, Radwan; Agard,
Bruno; Penz, Bernard |
|
The Base Stock/Base Backlog Control
Policy for a Make-to-Stock System With Impatient Customers |
8 |
1 |
Economopoulos, Angelos; Kouikoglou,
Vassilis; Grigoroudis, Evangelos |
|
Multiresource Shop Scheduling With
Resource Flexibility and Blocking |
8 |
1 |
Mati, Yazid; Xie, Xiaolan |
|
Rapid Color Grading for Fruit
Quality Evaluation Using Direct Color Mapping |
8 |
2 |
Lee, Dah-Jye; Archibald, James;
Xiong, Guangming |
|
Fast Intersection-Free Offset
Surface Generation From Freeform Models With Triangular Meshes |
8 |
2 |
Liu, Shengjun; Wang, Charlie |
|
Least-Cost Transition Firing
Sequence Estimation in Labeled Petri Nets With Unobservable Transitions |
8 |
2 |
Li, Lingxi; Hadjicostis,
Christoforos |
|
Automating Knowledge Discovery
Workflow Composition Through Ontology-Based Planning |
8 |
2 |
yakova, Monika; Kremen, Petr;
yelezny, Filip; Lavrac, Nada |
|
Bouc-Wen Modeling and Inverse
Multiplicative Structure to Compensate Hysteresis Nonlinearity in
Piezoelectric Actuators |
8 |
2 |
Rakotondrabe, Micky |
|
An Integer Programming Approach for
Analyzing the Measurement Redundancy in Structured Linear Systems |
8 |
2 |
Kianfar, Kiavash; Pourhabib, Arash;
Ding, Yu |
|
Selection Schemes of Dual
Virtual-Metrology Outputs for Enhancing Prediction Accuracy |
8 |
2 |
Wu, Wei-Ming; Cheng, Fan-Tien; Lin,
Tung-Ho; Zeng, Deng-Lin; Chen, Jyun-Fang |
|
A Three Degree-of-Freedom Optical
Orientation Measurement Method for Spherical Actuator Applications |
8 |
2 |
Yan, Liang; Chen, I; Guo, Zhongwei;
Lang, Yan; Li, Yunhua |
|
Design of a Maximally Permissive
Liveness- Enforcing Petri Net Supervisor for Flexible Manufacturing Systems |
8 |
2 |
Chen, YuFeng; Li, ZhiWu; Khalgui,
Mohamed; Mosbahi, Olfa |
|
Statistical Weight Kinetics Modeling
and Estimation for Silica Nanowire Growth Catalyzed by Pd Thin Film |
8 |
2 |
Huang, Qiang; Wang, Li; Dasgupta,
Tirthankar; Zhu, Li; Sekhar, Praveen; Bhansali, Shekhar; An, Yu |
|
A SNCCDBAGG-Based NN Ensemble
Approach for Quality Prediction in Injection Molding Process |
8 |
2 |
Liu, Yang; Wang, Fu-Li; Chang,
Yu-Qing; Li, Chuang |
|
Dynamic Pricing and Inventory
Control in a Make-to-Stock Queue With Information on the Production Status |
8 |
2 |
Chen, Liuxin; Chen, Youhua; Pang,
Zhan |
|
Automated Multi-Agent Search Using
Centroidal Voronoi Configuration |
8 |
2 |
K, Guruprasad; Ghose, Debasish |
|
A Totally Decoupled Piezo-Driven XYZ
Flexure Parallel Micropositioning Stage for Micro/Nanomanipulation |
8 |
2 |
Li, Yangmin; Xu, Qingsong |
|
In-Process Truing for ELID
(Electrolytic In-Process Dressing) Grinding by Pulsewidth Control |
8 |
2 |
Saleh, Tanveer; Rahman, Mustafizur |
|
KnitSketch: A Sketch Pad for
Conceptual Design of 2D Garment Patterns |
8 |
2 |
Ma, Cui-Xia; Liu, Yong-Jin; Yang,
Hai-Yan; Teng, Dong-Xing; Wang, Hong-An; Dai, Guo-Zhong |
|
Improvement of Suboptimal Siphon-
and FBM-Based Control Model of a Well-Known SłPR |
8 |
2 |
Chao, Daniel |
|
A Car-Seat Example of Automated
Anthropomorphic Testing of Fabrics Using Force-Controlled Robot Motions |
8 |
2 |
Valera, A; Benimeli, F; Solaz, J;
DeRosario, H; Robertsson, A; Nilsson, K; Zotovic, R; Mellado, M |
|
An Enhanced Nested Partitions
Algorithm Using Solution Value Prediction |
8 |
2 |
Chen, Weiwei; Pi, Liang; Shi, Leyuan |
|
A Framework to Model the Topological
Structure of Supply Networks |
8 |
2 |
Xuan, Qi; Du, Fang; Li, Yanjun; Wu,
Tie-Jun |
|
Adaptive Measurement for Automated
Field Reconstruction and Calibration of Magnetic Systems |
8 |
2 |
Hu, Liang; Lee, Kok-Meng; Zou, Jun;
Fu, Xin; Yang, Hua-Yong |
|
Optimal Paint Gun Orientation in
Spray Paint Applications-Experimental Results |
8 |
2 |
From, Pal; Gunnar, Johan; Gravdahl,
Jan |
|
A Convex Optimization Framework for
Almost Budget Balanced Allocation of a Divisible Good |
8 |
3 |
Chorppath, Anil; Bhashyam,
Srikrishna; Sundaresan, Rajesh |
|
Capacity Reservation and
Cancellation of Critical Resources |
8 |
3 |
Geng, Na; Xie, Xiaolan; Jiang,
Zhibin |
|
A Metamodeling Approach to the
Management of Intermodal Transportation Networks |
8 |
3 |
Boschian, Valentina; Dotoli,
Mariagrazia; Fanti, Maria; Iacobellis, Giorgio; Ukovich, Walter |
|
Building Association Link Network
for Semantic Link on Web Resources |
8 |
3 |
Luo, Xiangfeng; Xu, Zheng; Yu, Jie;
Chen, Xue |
|
IP-Based Real-Time Dispatching for Two-Machine
Batching Problem With Time Window Constraints |
8 |
3 |
Ham, Myoungsoo; Lee, Young; An,
Jaehyung |
|
Probabilistic Analysis and
Correction of Chen's Tag Estimate Method |
8 |
3 |
Vahedi, Ehsan; Wong, VincentW;
Blake, Ian; Ward, Rabab |
|
Automated Assembly for Mesoscale
Parts |
8 |
3 |
Cappelleri, David; Cheng, Peng;
Fink, Jonathan; Gavrea, Bogdan; Kumar, Vijay |
|
Robust Feedforward-Feedback Control
of a Nonlinear and Oscillating 2-DOF Piezocantilever |
8 |
3 |
Rakotondrabe, Micky; Rabenorosoa,
Kanty; Agnus, Joel; Chaillet, Nicolas |
|
Verification of K-Step Opacity and Analysis of Its Complexity |
8 |
3 |
Saboori, Anooshiravan; Hadjicostis,
Christoforos |
|
Operations Sequencing in Flexible
Production Lines With Bernoulli Machines |
8 |
3 |
Zhang, Liang; Yue, Xiaohang |
|
Design and Control of Paired Mobile
Robots Working Across a Thin Plate With Application to Aircraft Manufacturing |
8 |
3 |
Menon, M; Asada, H |
|
Client-Server Networked Automation
Systems Reactivity: Deterministic and Probabilistic Analysis |
8 |
3 |
Addad, Boussad; Amari, Said; Lesage,
Jean-Jacques |
|
Some Complexity Results for Metric
View Planning Problem With Traveling Cost and Visibility Range |
8 |
3 |
Wang, Pengpeng; Gupta, Kamal;
Krishnamurti, Ramesh |
|
Batch Transfer of Zebrafish Embryos
Into Multiwell Plates |
8 |
3 |
Zhang, Xuping; Lu, Zhe; Gelinas,
Danielle; Ciruna, Brian; Sun, Yu |
|
Efficient Framed Slotted Aloha
Protocol for RFID Tag Anticollision |
8 |
3 |
Wu, Haifeng; Zeng, Yu |
|
Automatic Detection of Bridge Deck
Condition From Ground Penetrating Radar Images |
8 |
3 |
Wang, Zhe; Zhou, Mengchu; Slabaugh,
Greg; Zhai, Jiefu; Fang, Tong |
|
Output-Sensitive Computation of
Force-Closure Grasps of a Semi-Algebraic Object |
8 |
3 |
Cheong, Jae-Sook; Kruger, Heinrich;
Der Stappen, A |
|
Projection and Geodesic-Based Pipe
Routing Algorithm |
8 |
3 |
Wang, Chengen; Liu, Qiang |
|
Nonblocking and Safe Control of
Discrete-Event Systems Modeled as Extended Finite Automata |
8 |
3 |
Ouedraogo, Lucien; Kumar, Ratnesh;
Malik, Robi; Akesson, Knut |
|
Game-Theoretic Design for Robust H∞ Filtering and Deconvolution
With Consideration of Known Input |
8 |
3 |
You, Fuqiang; Wang, Fuli; Guan,
Shouping |
|
A Case Study in System-Level
Physics-Based Simulation of a Biomimetic Robot |
8 |
3 |
Primerano, Richard; Wilkie, David;
Regli, William |
|
Hybrid Modeling for Performance
Evaluation of Multisource Renewable Energy Systems |
8 |
3 |
Guerin, Francois; Lefebvre, Dimitri;
Mboup, Alioune; Parede, Jean-Yves; Lemains, Eric; Ndiaye, Pape |
|
An Integrated Pricing and
Deteriorating Model and a Hybrid Algorithm for a VMI (Vendor-Managed-Inventory)
Supply Chain |
8 |
4 |
Yu, Yugang; Huang, George; Hong,
Zhaofu; Zhang, Xiandong |
|
Bending-Invariant Correspondence
Matching on 3-D Human Bodies for Feature Point Extraction |
8 |
4 |
Li, Samuel; Wang, Charlie; Hui,
Kin-Chuen |
|
Symbolic Computation of Reduced
Guards in Supervisory Control |
8 |
4 |
Miremadi, Sajed; Akesson, Knut;
Lennartson, Bengt |
|
Allocating Resources in Multiagent
Flowshops With Adaptive Auctions |
8 |
4 |
Lau, Hoong; Zhao, Zhengyi; Ge,
Shuzhi; Lee, Tong |
|
Linear Programming SVM-ARMA 2K With Application in Engine System
Identification |
8 |
4 |
Lu, Zhao; Sun, Jing; Butts, Kenneth |
|
Stochastic Algorithms for Discrete
Parameter Simulation Optimization |
8 |
4 |
Bhatnagar, Shalabh; Mishra, Vivek;
Hemachandra, Nandyala |
|
A Practical Approach for Maximally
Permissive Liveness-Enforcing Supervision of Complex Resource Allocation
Systems |
8 |
4 |
Nazeem, Ahmed; Reveliotis, Spyros |
|
Nonparametric and Semi-Parametric
Sensor Recovery in Multichannel Condition Monitoring Systems |
8 |
4 |
Liao, Haitao; Sun, Jian |
|
On the Flexible Demand Assignment
Problems: Case of Unmanned Aerial Vehicles |
8 |
4 |
Alidaee, Bahram; Wang, Haibo;
Landram, Frank |
|
Model-Assisted Stochastic Learning
for Robotic Applications |
8 |
4 |
Marvel, Jeremy; Newman, Wyatt |
|
Optimization Based Method for Supply
Location Selection and Routing in Large-Scale Emergency Material Delivery |
8 |
4 |
Han, Yunjun; Guan, Xiaohong; Shi,
Leyuan |
|
Optimization of Train Regulation and
Energy Usage of Metro Lines Using an Adaptive-Optimal-Control Algorithm |
8 |
4 |
Lin, Wei-Song; Sheu, Jih-Wen |
|
An Adaptive Sampling Algorithm for
Simulation-Based Optimization With Descriptive Complexity Preference |
8 |
4 |
Jia, Qing-Shan |
|
Development and Force/Position
Control of a New Hybrid Thermo-Piezoelectric MicroGripper Dedicated to
Micromanipulation Tasks |
8 |
4 |
Rakotondrabe, Micky; Ivan, Ioan |
|
Self Assessment-Based Decision
Making for Multiagent Cooperative Search |
8 |
4 |
Sujit, P; Ghose, Debasish |
|
Supervisor Optimization for Deadlock
Resolution in Automated Manufacturing Systems With Petri Nets |
8 |
4 |
Hu, Hesuan; Zhou, MengChu; Li, Zhiwu |
|
The Linehaul-Feeder Vehicle Routing
Problem With Virtual Depots |
8 |
4 |
Chen, Huey-Kuo; Chou, Huey-Wen;
Hsueh, Che-Fu; Ho, Tsung-Yu |
|
Optimal Image-Based Euclidean
Calibration of Structured Light Systems in General Scenes |
8 |
4 |
Bird, Nathaniel; Papanikolopoulos,
Nikolaos |
|
What is Automation? |
9 |
1 |
Ken Goldberg |
|
M-Ary
RFID Tags Splitting With Small Idle Slots |
9 |
1 |
Hongbo Guo; Leung, V.C.M.; Bolic, M. |
|
Modified Two-Stage Degradation Model
for Dynamic Maintenance Threshold Calculation Considering Uncertainty |
9 |
1 |
Sun, Jiwen; Li, Lin; Xi, Lifeng |
|
Schedulability Analysis and Optimal
Scheduling of Dual-Arm Cluster Tools With Residency Time Constraint and
Activity Time Variation |
9 |
1 |
NaiQi Wu; MengChu Zhou |
|
Application of the Assembly Skill
Transfer System in an Actual Cellular Manufacturing System |
9 |
1 |
Duan, Feng; Tan, Jeffrey; Tong, Ji;
Kato, Ryu; Arai, Tamio |
|
Solution Workflows for Model-Based
Analysis of Complex Systems |
9 |
1 |
Moscato, Francesco; Vittorini,
Valeria; Amato, Flora; Mazzeo, Antonino; Mazzocca, Nicola |
|
A Production-Inventory System With
Both Patient and Impatient Demand Classes |
9 |
1 |
Benjaafar, Saif; Elhafsi, Mohsen |
|
Input Order Robustness: Definition,
Verification Procedure, and Examples |
9 |
1 |
Allen, L; Goh, K; Tilbury, D |
|
Workflow Nets for Multiagent
Cooperation |
9 |
1 |
Kotb, Y.T.; Beauchemin, S.S.;
Barron, J.L. |
|
From Hardware-in-the-Loop to Hybrid
Process Simulation: An Ontology for the Implementation Phase of a
Manufacturing System |
9 |
1 |
Harrison, William; Tilbury, Dawn;
Yuan, Chengyin |
|
An Effective Meta-Heuristic for
No-Wait Job Shops to Minimize Makespan |
9 |
1 |
Jie Zhu; Xiaoping Li |
|
A Comparative Study on Two Types of
Automated Container Terminal Systems |
9 |
1 |
Zhen, Lu; Lee, Loo; Chew, Ek; Chang,
Dao-Fang; Xu, Zhi-Xiang |
|
A Semantic Product Modeling
Framework and Its Application to Behavior Evaluation |
9 |
1 |
Lee, Jae; Fenves, Steven; Bock,
Conrad; Suh, Hyo-Won; Rachuri, Sudarsan; Fiorentini, Xenia; Sriram, Ram |
|
A Polynomial Dynamic Programming
Algorithm for Crude Oil Transportation Planning |
9 |
1 |
Chu, Chengbin; Chu, Feng; Zhou,
MengChu; Chen, Haoxun; Shen, Qingning |
|
Improvement of Lagrangian Relaxation
Convergence for Production Scheduling |
9 |
1 |
Buil, Roman; Piera, Miquel; Luh,
Peter |
|
Discrete-Event Coordination Design
for Distributed Agents |
9 |
1 |
Pham, Manh; Seow, Kiam |
|
Functional Morphing in Multistage
Manufacturing and Its Applications in High-Definition Metrology-Based Process
Control |
9 |
1 |
Zhou, Liang; Wang, Hui; Berry,
Christopher; Weng, Xin; Hu, S |
|
Developing an Automatic Virtual
Metrology System |
9 |
1 |
Cheng, Fan-Tien; Huang, Hsien-Cheng;
Kao, Chi-An |
|
Building a Communication Bridge With
Mobile Hubs |
9 |
1 |
Tekdas, Onur; Kumar, Yokesh; Isler,
Volkan; Janardan, Ravi |
|
A Bayesian Hierarchical Framework
for Multitarget Labeling and Correspondence With Ghost Suppression Over
Multicamera Surveillance System |
9 |
1 |
Huang, Ching-Chun; Wang, Sheng-Jyh |
|
A Multiscale Assembly and Packaging
System for Manufacturing of Complex Micro-Nano Devices |
9 |
1 |
Das, Aditya; Murthy, Rakesh; Popa,
Dan; Stephanou, Harry |
|
Editorial Tracking T-ASE Inventory
by Methodology and Application |
9 |
2 |
Ken Goldberg |
|
Feedback Matching Framework for
Semantic Interoperability of Product Data |
9 |
2 |
Yeo, Il; Patil, Lalit; Dutta,
Debasish |
|
Evaluation of Telerobotic Shared
Control Strategy for Efficient Single-Cell Manipulation |
9 |
2 |
Kim, Jungsik; Ladjal, Hamid; Folio,
David; Ferreira, Antoine; Kim, Jung |
|
An Intelligent Quick Prediction
Algorithm With Applications in Industrial Control and Loading Problems |
9 |
2 |
Yu, Yong; Choi, Tsan-Ming; Hui,
Chi-Leung |
|
Seam Following for Automated
Industrial Fiber Mat Stitching |
9 |
2 |
Richtsfeld, Mario; Vincze, Markus |
|
Parameter Optimization Design for
Touch Panel Laser Cutting Process |
9 |
2 |
Su, Chao-Ton; Hsiao, Yu-Hsiang;
Chang, Chia-Chin |
|
An Information-Based Approach to
Compute Similarity Between Engineering Changes |
9 |
2 |
Mehta, Chandresh; Patil, Lalit;
Dutta, Debasish |
|
Performance Assessment and Design
for Univariate Alarm Systems Based on FAR, MAR, and AAD |
9 |
2 |
Xu, Jianwei; Wang, Jiandong; Izadi,
Iman; Chen, Tongwen |
|
Efficient Computing Budget
Allocation for Simulation-Based Policy Improvement |
9 |
2 |
Jia, Qing-Shan |
|
Probability Evaluation Models of
Product Disassembly Cost Subject to Random Removal Time and Different Removal
Labor Cost |
9 |
2 |
Tian, Guangdong; Zhou, MengChu; Chu,
Jiangwei; Liu, Yumei |
|
Modeling, Analysis and Control of
Dual-Arm Cluster Tools With Residency Time Constraint and Activity Time
Variation Based on Petri Nets |
9 |
2 |
Wu, Nai; Zhou, MengChu |
|
Modular Supervisory Control and
Hierarchical Supervisory Control of Fuzzy Discrete-Event Systems |
9 |
2 |
Jayasiri, Awantha; Mann, George;
Gosine, Raymond |
|
Dynamic Control of Data Streaming
and Processing in a Virtualized Environment |
9 |
2 |
Cao, Junwei; Zhang, Wen; Tan, Wei |
|
Modeling and Optimization of Energy
Consumption in Cooperative Multi-Robot Systems |
9 |
2 |
Vergnano, Alberto; Thorstensson,
Carl; Lennartson, Bengt; Falkman, Petter; Pellicciari, Marcello; Leali,
Francesco; Biller, Stephan |
|
Sequence Planning Using Multiple and
Coordinated Sequences of Operations |
9 |
2 |
Bengtsson, Kristofer; Bergagard,
Patrik; Thorstensson, Carl; Lennartson, Bengt; Akesson, Knut; Yuan, Chengyin;
Miremadi, Sajed; Falkman, Petter |
|
A Solution to the Optimal Lot-Sizing
Problem as a Stochastic Resource Contention Game |
9 |
2 |
Yao, Chen; Cassandras, Christos |
|
Sliding Mode Dead-Beat Control of
Perishable Inventory Systems With Multiple Suppliers |
9 |
2 |
Ignaciuk, P.; Bartoszewicz, A. |
|
Control Loop Performance Assessment With
a Dynamic Neuro-Fuzzy Model (dFasArt) |
9 |
2 |
Cano-Izquierdo, Jose-Manuel;
Ibarrola, Julio; Kroeger, Miguel |
|
Modeling and Analysis of Rapid
Response Process to Improve Patient Safety in Acute Care |
9 |
2 |
Xie, Xiaolei; Li, Jingshan; Swartz,
Colleen; DePriest, Paul |
|
Redesign Distributed PLC Control
Systems Using IEC 61499 Function Blocks |
9 |
2 |
Dai, Wenbin; Vyatkin, Valeriy |
|
A Generalized Tip-Membrane Contact
Detection Algorithm for Automated Single Cell Electroporation Using
Statistical Process Control |
9 |
2 |
Sakaki, Kelly; Esmaeilsabzali, Hadi;
Dechev, Nikolai; Burke, Robert; Park, Edward |
|
A Petri Net Approach to
Mediation-Aided Composition of Web Services |
9 |
2 |
Du, Yanhua; Li, Xitong; Xiong,
PengCheng |
|
Real-Time Adaptive Control of a
Flexible Manipulator Using Reinforcement Learning |
9 |
2 |
Pradhan, Santanu; Subudhi, Bidyadhar |
|
An Analytical Performance Modeling
Approach for Supply Chain Networks |
9 |
2 |
Srivathsan, Sandeep; Kamath,
Manjunath |
|
Conjunctive and Disjunctive
Architectures for Decentralized Prognosis of Failures in Discrete-Event
Systems |
9 |
2 |
Khoumsi, Ahmed; Chakib, Hicham |
|
Editorial A Secret to Advancing
Research and Increasing Citations to Your Papers |
9 |
3 |
Ken Goldberg |
|
Energy Modeling of Machine Tools for
Optimization of Machine Setups |
9 |
3 |
Bi, Z.M.; Lihui Wang |
|
Adaptive Hybrid Algorithms for the
Sequence-Dependent Setup Time Permutation Flow Shop Scheduling Problem |
9 |
3 |
Xiaoping Li; Yi Zhang |
|
Recognition of Curved Surfaces From “One-Dimensional”
Tactile Data |
9 |
3 |
Ibrayev, R.; Yan-Bin Jia |
|
Real-Time Scheduling of Single-Arm
Cluster Tools Subject to Residency Time Constraints and Bounded Activity Time
Variation |
9 |
3 |
Yan Qiao; NaiQi Wu; MengChu Zhou |
|
A Compliant Parallel XY Micromotion
Stage With Complete Kinematic Decoupling |
9 |
3 |
Yangmin Li; Jiming Huang; Hui Tang |
|
Neural-Network-Based Optimal Control
for a Class of Unknown Discrete-Time Nonlinear Systems Using Globalized Dual
Heuristic Programming |
9 |
3 |
Derong Liu; Ding Wang; Dongbin Zhao;
Qinglai Wei; Ning Jin |
|
Design and Development of a
Flexure-Based Dual-Stage Nanopositioning System With Minimum Interference
Behavior |
9 |
3 |
Qingsong Xu |
|
Efficient Selection of a Set of Good
Enough Designs With Complexity Preference |
9 |
3 |
Shen Yan; Enlu Zhou; Chun-Hung Chen |
|
Energy Savings in Metropolitan
Railway Substations Through Regenerative Energy Recovery and Optimal Design
of ATO Speed Profiles |
9 |
3 |
Domínguez, M.;
Fernández-Cardador, A.; Cucala, A.P.;
Pecharromán, R.R. |
|
Coalition-Based Approach to Task
Allocation of Multiple Robots With Resource Constraints |
9 |
3 |
Jian Chen; Dong Sun |
|
Theory and Performance Evaluation of
Group Coding of RFID Tags |
9 |
3 |
Sato, Y.; Mitsugi, J.; Nakamura, O.;
Murai, J. |
|
A Concurrent Approach to Reducing
Environmental Impact of Product Development at the System Design Stage |
9 |
3 |
Chih-Hsing Chu; Su, J.C.P.;
Yuan-Tsung Chen |
|
Cyclic Task Scheduling for
Multifunction Radar |
9 |
3 |
Mir, H.S.; Ben Abdelaziz, F. |
|
Feasibility of Intelligent
Monitoring of Construction Workers for Carbon Monoxide Poisoning |
9 |
3 |
Forsyth, J.B.; Martin, T.L.;
Young-Corbett, D.; Dorsa, E. |
|
Open Software Platform for Robotic
Services |
9 |
3 |
Soohee Han; Mi-sook Kim; Hong Seong
Park |
|
Kalman Filter-Based Coarse-to-Fine
Control for Display Visual Alignment Systems |
9 |
3 |
SangJoo Kwon; Haemin Jeong; Jaewoong
Hwang |
|
Guest Editorial A Revolution in the
Warehouse: A Retrospective on Kiva Systems and the Grand Challenges Ahead |
9 |
4 |
Raffaello D’Andrea |
|
Real-Time Path Planning for
Coordinated Transport of Multiple Particles Using Optical Tweezers |
9 |
4 |
Banerjee, Ashis; Chowdhury, Sagar;
Losert, Wolfgang; Gupta, Satyandra |
|
Nanorobotic Assembly and Focused Ion
Beam Processing of Nanotube-Enhanced AFM Probes |
9 |
4 |
Eichhorn, Volkmar; Bartenwerfer,
Malte; Fatikow, Sergej |
|
Iterative Deepening A* Algorithms
for the Container Relocation Problem |
9 |
4 |
Zhu, Wenbin; Qin, Hu; Lim, Andrew;
Zhang, Huidong |
|
Modeling the Interactions Among
Neighboring Nanostructures for Local Feature Characterization and Defect
Detection |
9 |
4 |
Xu, Lijuan; Huang, Qiang |
|
An Efficient Outpatient Scheduling
Approach |
9 |
4 |
Zhu, Haibin; Hou, Ming; Wang, Chun;
Zhou, MengChu |
|
Vision-Based Tactile Sensing and
Shape Estimation Using a Fluid-Type Touchpad |
9 |
4 |
Ito, Yuji; Kim, Youngwoo; Nagai,
Chikara; Obinata, Goro |
|
Drift Compensation in AFM-Based
Nanomanipulation by Strategic Local Scan |
9 |
4 |
Li, Guangyong; Wang, Yucai; Liu,
Lianqing |
|
Constructing Multiple Kernel
Learning Framework for Blast Furnace Automation |
9 |
4 |
Jian, Ling; Gao, Chuanhou; Xia,
Zhonghang |
|
Automated Detection of Influential
Patents Using Singular Values |
9 |
4 |
Kim, Dohyun; Lee, Bangrae; Lee,
Hyuck; Lee, Sang; Moon, Yeongho; Jeong, Myong |
|
A Hybrid Model of Complex Automated
Warehouse Systems—Part II: Analysis and Experimental Results |
9 |
4 |
Basile, Francesco; Chiacchio,
Pasquale; Coppola, Jolanda |
|
A Hybrid Model of Complex Automated
Warehouse Systems—Part I: Modeling and Simulation |
9 |
4 |
Basile, Francesco; Chiacchio,
Pasquale; Coppola, Jolanda |
|
Modeling and Optimization of
Building Emergency Evacuation Considering Blocking Effects on Crowd Movement |
9 |
4 |
Luh, Peter; Wilkie, Christian;
Chang, Shi-Chung; Marsh, Kerry; Olderman, Neal |
|
Editorial Automation in Green
Manufacturing |
10 |
1 |
JingShan Li, James R. Morrison, Mike
Tao Zhang, Masaru Nakano, Steohan Biller, Bengt Lennertson |
|
Requirement-Based Bidding Language
for Agent-Based Scheduling |
10 |
1 |
Wang, Chun |
|
High-Level Scheduling of Energy
Optimal Trajectories |
10 |
1 |
Wigstrom, Oskar; Lennartson, Bengt;
Vergnano, Alberto; Breitholtz, Claes |
|
A Modeling Approach to Analyze
Variability of Remanufacturing Process Routing |
10 |
1 |
Li, Congbo; Tang, Ying; Li,
Chengchuan; Li, Lingling |
|
Scheduling Cluster Tools With Ready
Time Constraints for Consecutive Small Lots |
10 |
1 |
Kim, Hyun-Jung; Lee, Jun-Ho; Jung,
Chihyun; Lee, Tae-Eog |
|
Energy-Efficient Production Systems
Through Schedule-Based Operations |
10 |
1 |
Guorong Chen; Liang Zhang; Arinez,
J.; Biller, S. |
|
Virtual Battery: A Battery
Simulation Framework for Electric Vehicles |
10 |
1 |
Ju, Feng; Wang, Junwen; Li,
Jingshan; Xiao, Guoxian; Biller, Stephan |
|
Correct-by-Construction and Optimal
Synthesis of Beacon-Enabled ZigBee Network |
10 |
1 |
Xu, Songyan; Kumar, Ratnesh; Pinto,
Alessandro |
|
Finite Bisimulation of Reactive
Untimed Infinite State Systems Modeled as Automata With Variables |
10 |
1 |
Zhou, Changyan; Kumar, Ratnesh |
|
A Simulation-Based Tool for Energy
Efficient Building Design for a Class of Manufacturing Plants |
10 |
1 |
Liu, Hao; Zhao, Qianchuan; Huang,
Ningjian; Zhao, Xiang |
|
A Network Flow Model for the
Performance Evaluation and Design of Material Separation Systems For
Recycling |
10 |
1 |
Wolf, Malima; Colledani, Marcello;
Gershwin, Stanley; Gutowski, Timothy |
|
Carbon Footprint and the Management
of Supply Chains: Insights From Simple Models |
10 |
1 |
Benjaafar, Saif; Li, Yanzhi; Daskin,
Mark |
|
An Approximate Solution for
Semi-Open Queueing Network Model of an Autonomous Vehicle Storage and
Retrieval System |
10 |
1 |
Ekren, B.Y.; Heragu, S.S.;
Krishnamurthy, A.; Malmborg, C.J. |
|
A Petri Net and Extended Genetic
Algorithm Combined Scheduling Method for Wafer Fabrication |
10 |
1 |
Qiao, Fei; Ma, Yu-min; Li, Li; Yu,
Hong-xia |
|
Calibration of Stochastic Computer
Models Using Stochastic Approximation Methods |
10 |
1 |
Yuan, Jun; Ng, Szu; Tsui, Kwok |
|
I-Detectability of Discrete-Event
Systems |
10 |
1 |
Shu, Shaolong; Lin, Feng |
|
Fault Diagnosis Using an Enhanced
Relevance Vector Machine (RVM) for Partially Diagnosable Multistation
Assembly Processes |
10 |
1 |
Bastani, Kaveh; Kong, Zhenyu; Huang,
Wenzhen; Huo, Xiaoming; Zhou, Yingqing |
|
Visual Control of an Automatic
Manipulation System by Microscope and Pneumatic Actuator |
10 |
1 |
Chen, Hung; Shih, Ming |
|
Opportunity Estimation for Real-Time
Energy Control of Sustainable Manufacturing Systems |
10 |
1 |
Sun, Zeyi; Li, Lin |
|
Designing a Sustainable and
Distributed Generation System for Semiconductor Wafer Fabs |
10 |
1 |
Villarreal, Saul; Jimenez, Jesus;
Jin, Tongdan; Cabrera-Rios, Mauricio |
|
Assembly Strategies for
Remanufacturing Systems With Variable Quality Returns |
10 |
1 |
Jin, Xiaoning; Hu, S; Ni, Jun; Xiao,
Guoxian |
|
Energy Reduction in a
Pallet-Constrained Flow Shop Through On–Off Control of Idle
Machines |
10 |
1 |
Mashaei, Maziar; Lennartson, Bengt |
|
Guest Editorial Exciting Trends for
Automation in Manufacturing |
10 |
2 |
S.K. Gupta, Vijay Kumar |
|
Similarity Analysis of Industrial
Alarm Flood Data |
10 |
2 |
Ahmed, K.; Izadi, I.; Tongwen Chen;
Joe, D.; Burton, T. |
|
Polyhedral Assembly Partitioning
With Infinite Translations or The Importance of Being Exact |
10 |
2 |
Fogel, Efi; Halperin, Dan |
|
Performance Metrics of Speed and
Separation Monitoring in Shared Workspaces |
10 |
2 |
Marvel, Jeremy |
|
Self-Configuration of Waypoints for
Docking Maneuvers of Flexible Automated Guided Vehicles |
10 |
2 |
Herrero, David; Villagra, Jorge;
Martinez, Humberto |
|
UHF RFID Localization Based on
Synthetic Apertures |
10 |
3 |
Miesen, Robert; Kirsch, Fabian;
Vossiek, Martin |
|
Precision Position/Force Interaction
Control of a Piezoelectric Multimorph Microgripper for Microassembly |
10 |
3 |
Xu, Qingsong |
|
Decentralized Fault Diagnosis of
Continuous Annealing Processes Based on Multilevel PCA |
10 |
3 |
Liu, Qiang; Qin, S; Chai, Tianyou |
|
A Review of Haptic Feedback
Teleoperation Systems for Micromanipulation and Microassembly |
10 |
3 |
Bolopion, Aude; Regnier, Stephane |
|
Magnetic Self-Assembly of Ultra-Thin
Chips to Polymer Foils |
10 |
3 |
Kuran, Emine; Tichem, Marcel |
|
Interval Analysis of Kinematic
Errors in Serial Manipulators Using Product of Exponentials Formula |
10 |
3 |
Pac, Muhammed; Popa, Dan |
|
Coordinated Iterative Learning
Control Schemes for Train Trajectory Tracking With Overspeed Protection |
10 |
2 |
Sun, Heqing; Hou, Zhongsheng; Li,
Dayou |
|
Thin Layer SOI-FETs Used for Stress-Sensing
and Its Application in Accelerometers |
10 |
2 |
Wang, Huiquan; Yang, Junyi; Yan,
Sheping; Jin, Zhonghe |
|
Experimental Analysis of Laser
Interferometry-Based Robust Motion Tracking Control of a Flexure-Based
Mechanism |
10 |
2 |
Bhagat, Umesh; Shirinzadeh, Bijan;
Tian, Yanling; Zhang, Dawei |
|
Swarm Intelligence Approaches to
Optimal Power Flow Problem With Distributed Generator Failures in Power
Networks |
10 |
2 |
Kang, Qi; Zhou, MengChu; An, Jing;
Wu, QiDi |
|
Fault Detection by Labeled Petri
Nets in Centralized and Distributed Approaches |
10 |
2 |
Fanti, Maria; Mangini, Agostino;
Ukovich, Walter |
|
AFM-Based Robotic Nano-Hand for
Stable Manipulation at Nanoscale |
10 |
2 |
Hou, Jing; Liu, Lianqing; Wang,
Zhiyu; Wang, Zhidong; Xi, Ning; Wang, Yuechao; Wu, Chengdong; Dong, Zaili; Yuan,
Shuai |
|
An Effective Artificial Bee Colony
Algorithm for a Real-World Hybrid Flowshop Problem in Steelmaking Process |
10 |
2 |
Pan, Quan-Ke; Wang, Ling; Mao, Kun;
Zhao, Jin-Hui; Zhang, Min |
|
Energy Saving Opportunity Analysis
of Automotive Serial Production Systems (March 2012) |
10 |
2 |
Chang, Qing; Xiao, Guoxian; Biller,
Stephan; Li, Lin |
|
Functional and Behavior Models for
the Supervision of an Intelligent and Autonomous System |
10 |
2 |
Chatti, Nizar; Gehin, Anne-Lise;
Ould-Bouamama, Belkacem; Merzouki, Rochdi |
|
Development and Evaluation of
Object-Based Visual Attention for Automatic Perception of Robots |
10 |
2 |
Yu, Yuanlong; Gu, Jason; Mann,
George; Gosine, Raymond |
|
A Semi-Automated Positioning System
for Contact-Mode Atomic Force Microscopy (AFM) |
10 |
2 |
Roy, Rajarshi; Chen, Wenjin; Cong,
Lei; Goodell, Lauri; Foran, David; Desai, Jaydev |
|
Hybrid Analysis in the Latent
Nestling Method Applied to Fault Diagnosis |
10 |
2 |
Urrego, Leonardo; Moreno, Emilio;
Anglada, Francisco; Salvador, Antonio; Cucarella, Eduardo |
|
Online Sensor Activation for
Detectability of Discrete Event Systems |
10 |
2 |
Shu, Shaolong; Huang, Zhiqiang; Lin,
Feng |
|
Optimal Alarm Signal Processing:
Filter Design and Performance Analysis |
10 |
2 |
Cheng, Yue; Izadi, Iman; Chen,
Tongwen |
|
A Geometric Distribution Reader Anti-Collision
Protocol for RFID Dense Reader Environments |
10 |
2 |
Bueno-Delgado, M; Ferrero, Renato;
Gandino, Filippo; Pavon-Marino, Pablo; Rebaudengo, Maurizio |
|
Design, Simulation, and Fabrication
of Microneedles and a Blood Filter for Use in a Hemofiltration System |
10 |
2 |
Tayyaba, Shahzadi; Ashraf, Muhammad;
Afzulpurkar, Nitin |
|
AFAM: An Articulated Four Axes
Microrobot for Nanoscale Applications |
10 |
2 |
Murthy, Rakesh; Stephanou, Harry;
Popa, Dan |
|
Adaptive Dispatching Rule for
Semiconductor Wafer Fabrication Facility |
10 |
2 |
Li, Li; Sun, Zijin; Zhou, MengChu;
Qiao, Fei |
|
An Assembly-Skill-Transferring
Method for Cellular Manufacturing System—Part I: Verification of
the Proposed Method for Motor Skill |
10 |
2 |
Feng Duan; Qi Gao; Chi Zhu; Kato,
R.; Arai, T. |
|
An Integrated Two-Level
Self-Calibration Method for a Cable-Driven Humanoid Arm |
10 |
2 |
Chen, Quanzhu; Chen, Weihai; Yang,
Guilin; Liu, Rong |
|
Mobile Phones as Seismologic
Sensors: Automating Data Extraction for the iShake System |
10 |
2 |
Reilly, Jack; Dashti, Shideh; Ervasti,
Mari; Bray, Jonathan; Glaser, Steven; Bayen, Alexandre |
|
Guest Editorial Microassembly for
Manufacturing at Small Scales |
10 |
3 |
Philippe Lutz, Karl Bohringer,
Cedric Clevy, Dan Popa, Quan Zhou |
|
Analysis and Motion Control of a
Centrifugal-Force Microrobotic Platform |
10 |
3 |
Vartholomeos, Panagiotis; Vlachos,
Kostas; Papadopoulos, Evangelos |
|
An Optimization Approach to Improved
Petri Net Controller Design for Automated Manufacturing Systems |
10 |
3 |
Hu, Hesuan; Zhou, MengChu; Li,
Zhiwu; Tang, Ying |
|
Building Energy Management:
Integrated Control of Active and Passive Heating, Cooling, Lighting, Shading,
and Ventilation Systems |
10 |
3 |
Sun, Biao; Luh, Peter; Jia,
Qing-Shan; Jiang, Ziyan; Wang, Fulin; Song, Chen |
|
Type Synthesis, Kinematic Analysis,
and Optimal Design of a Novel Class of Schönflies-Motion Parallel
Manipulators |
10 |
3 |
Li, Zhibin; Lou, Yunjiang; Zhang,
Yongsheng; Liao, Bin; Li, Zexiang |
|
RFID Reader Scheduling for Reliable
Identification of Moving Tags |
10 |
3 |
Alcaraz, Juan; Vales-Alonso, Javier;
Garcia-Haro, Joan |
|
Coordination Motion Control in the
Task Space for Parallel Manipulators With Actuation Redundancy |
10 |
3 |
Shang, Weiwei; ShuangCong, null; Ge,
Yuan |
|
Analysis and Specificities of
Adhesive Forces Between Microscale and Nanoscale |
10 |
3 |
Gauthier, Michael; Alvo, Sebastien;
Dejeu, Jerome; Tamadazte, Brahim; Rougeot, Patrick; Regnier, Stephane |
|
A Data-Level Fusion Model for
Developing Composite Health Indices for Degradation Modeling and Prognostic
Analysis |
10 |
3 |
Liu, Kaibo; Gebraeel, Nagi; Shi,
Jianjun |
|
Multiobjective Optimization for
Autonomous Straddle Carrier Scheduling at Automated Container Terminals |
10 |
3 |
Cai, Binghuang; Huang, Shoudong;
Liu, Dikai; Yuan, Shuai; Dissanayake, Gamini; Lau, Haye; Pagac, Daniel |
|
A High Performing Memetic Algorithm
for the Flowshop Scheduling Problem With Blocking |
10 |
3 |
Pan, Quan-ke; Wang, Ling; Sang,
Hong-yan; Li, Jun-qing; Liu, Min |
|
Solving Assembly Scheduling Problems
With Tree-Structure Precedence Constraints: A Lagrangian Relaxation Approach |
10 |
3 |
Xu, Jingyang; Nagi, Rakesh |
|
Automated Guiding Task of a Flexible
Micropart Using a Two-Sensing-Finger Microgripper |
10 |
3 |
Komati, Bilal; Rabenorosoa, Kanty;
Clevy, Cedric; Lutz, Philippe |
|
Cross-Domain Model Building and
Validation (CDMV): A New Modeling Strategy to Reinforce Understanding of
Nanomanufacturing Processes |
10 |
3 |
Wang, Li; Huang, Qiang |
|
Modeling Load Parameters of Ball
Mill in Grinding Process Based on Selective Ensemble Multisensor Information |
10 |
3 |
Tang, Jian; Chai, Tianyou; Yu, Wen;
Zhao, Lijie |
|
Instrumented Knee Prosthesis for
Force and Kinematics Measurements |
10 |
3 |
Arami, A; Simoncini, M; Atasoy, O;
Ali, S; Hasenkamp, W; Bertsch, A; Meurville, E; Tanner, S; Renaud, P;
Dehollain, C; Farine, P; Jolles, B; Aminian, K; Ryser, P |
|
Automated Identification of Plywood
Using Embedded Inkjet-Printed Passive UHF RFID Tags |
10 |
3 |
Virtanen, Juha; Virkki, Johanna;
Sydanheimo, Lauri; Tentzeris, Manos; Ukkonen, Leena |
|
An Unsupervised Approach for
Automatic Activity Recognition Based on Hidden Markov Model Regression |
10 |
3 |
Trabelsi, Dorra; Mohammed, Samer;
Chamroukhi, Faicel; Oukhellou, Latifa; Amirat, Yacine |
|
Representation and Exchange of
Knowledge About Actions, Objects, and Environments in the RoboEarth Framework |
10 |
3 |
Tenorth, Moritz; Perzylo, Alexander;
Lafrenz, Reinhard; Beetz, Michael |
|
Automated Pick-Place of Silicon
Nanowires |
10 |
3 |
Ye, Xutao; Zhang, Yong; Ru,
Changhai; Luo, Jun; Xie, Shaorong; Sun, Yu |
|
User-Adaptive Sketch-Based 3-D CAD
Model Retrieval |
10 |
3 |
Liu, Yong-Jin; Luo, Xi; Joneja,
Ajay; Ma, Cui-Xia; Fu, Xiao-Lan; Song, Dawei |
|
EM Estimation of Nanostructure
Interactions With Incomplete Feature Measurement and Its Tailored Space
Filling Designs |
10 |
3 |
Xu, Lijuan; Huang, Qiang |
|
Smart Management of Multiple Energy
Systems in Automotive Painting Shop |
10 |
3 |
Xu, Zhanbo; Jia, Qing-Shan; Guan,
Xiaohong; Shen, Jianxiang |
|
Research in Automated Planning and
Control for Micromanipulation |
10 |
3 |
Banerjee, Ashis; Gupta, Satyandra |
|
Noncyclic Scheduling for Timed
Discrete-Event Systems With Application to Single-Armed Cluster Tools Using
Pareto-Optimal Optimization |
10 |
3 |
Wikborg, Uno; Lee, Tae-Eog |
|
A Novel Method for Calculating
Service Reputation |
10 |
3 |
Wu, Yan; Yan, ChunGang; Ding, ZhiJun;
Liu, GuanJun; Wang, PengWei; Jiang, ChangJun; Zhou, MengChu |
|
Open-Loop Precision Grasping With
Underactuated Hands Inspired by a Human Manipulation Strategy |
10 |
3 |
Odhner, Lael; Ma, RaymondR; Dollar,
Aaron |
|
Guest Editorial on Workshop on the
Algorithmic Foundations of Robotics (WAFR) |
10 |
4 |
Kevin Lynch |
|
Guest Editorial on Eighth Annual
Conference on Automation Science and Engineering (CASE 2012) |
10 |
4 |
N.Y. Chong |
|
Polynomial Test for Stochastic
Diagnosability of Discrete-Event Systems |
10 |
4 |
Chen, J.; Kumar, R. |
|
LMI-Based Gain Synthesis for Simple
Robust Quadrotor Control |
10 |
4 |
Ryan, T.; Jin Kim, H. |
|
Counting Moving Bodies Using Sparse
Sensor Beams |
10 |
4 |
Erickson, L.H.; Yu, J.; Huang, Y.;
LaValle, S.M. |
|
Hybridization of Bound-and-Decompose
and Mixed Integer Feasibility Checking to Measure Redundancy in Structured
Linear Systems |
10 |
4 |
Bansal, M.; Kianfar, K.; Ding, Y.;
Moreno-Centeno, E. |
|
Predicting Stay Time of Mobile Users
With Contextual Information |
10 |
4 |
Liu, S.; Cao, H.; Li, L.; Zhou, M. |
|
Detection of Correlated Alarms Based
on Similarity Coefficients of Binary Data |
10 |
4 |
Yang, Z.; Wang, J.; Chen, T. |
|
Spatiotemporal Differentiation of
Myocardial Infarctions |
10 |
4 |
Yang, H.; Kan, C.; Liu, G.; Chen, Y. |
|
Cost Analysis of an Engineering
System Involving Subsystems in Series Configuration |
10 |
4 |
Singh, V.V.; Ram, M.; Rawal, D.K. |
|
Automated Formal Verification of
Routing in Material Handling Systems |
10 |
4 |
Klotz, T.; Schonherr, J.; Sesler,
N.; Straube, B.; Turek, K. |
|
Litho Machine Scheduling With Convex
Hull Analyses |
10 |
4 |
Yan, B.; Chen, H.Y.; Luh, P.B.;
Wang, S.; Chang, J. |
|
Robust Free Space Computation for
Curved Planar Bodies |
10 |
4 |
Milenkovic, V.; Sacks, E.; Trac, S. |
|
Automated Cell Transport in Optical
Tweezers-Assisted Microfluidic Chambers |
10 |
4 |
Chowdhury, S.; Svec, P.; Wang, C.;
Seale, K. T.; Wikswo, J. P.; Losert, W.; Gupta, S. K. |
|
Feature Localization Using
Kinematics and Impulsive Hybrid Optimization |
10 |
4 |
Leong, Y.P.; Murphey, T. |
|
Data Providing Services Clustering
and Management for Facilitating Service Discovery and Replacement |
10 |
4 |
Zhou, Z.; Sellami, M.; Gaaloul, W.;
Barhamgi, M.; Defude, B. |
|
On Deciding the Existence of a
Liveness Enforcing Supervisory Policy in a Class of Partially Controlled
General Free-Choice Petri Nets |
10 |
4 |
Somnath, N.; Sreenivas, R. S. |
|
Optimal Motion Planning of All
Position Autonomous Mobile Welding Robot System for Fillet Seams |
10 |
4 |
Zhang, T.; Chen, S.; Wu, M.; Zhao,
Y.; Chen, X. |
|
Modular Modelling for the Diagnostic
of Complex Discrete-Event Systems |
10 |
4 |
Gascard, E.; Simeu-Abazi, Z. |
|
Sustainable and Robust Control of
Cyclic Pallet Systems |
10 |
4 |
Mashaei, M.; Lennartson, B. |
|
Robot-Guided Open-Loop Insertion of
Skew-Line Needle Arrangements for High Dose Rate Brachytherapy |
10 |
4 |
Garg, A.; Siauw, T.; Berenson, D.;
Cunha, J.A.M.; Hsu, I.-C.; Pouliot, J.; Stoianovici, D.; Goldberg, K. |
|
A Differential Evolution-Based
Algorithm to Schedule Flexible Assembly Lines |
10 |
4 |
Vincent, L. W. H.; Ponnambalam, S.
G. |
|
Two-Level Production Plan
Decomposition Based on a Hybrid MOEA for Mineral Processing |
10 |
4 |
Yu, G.; Chai, T.; Luo, X. |
|
On the Implementation of Industrial
Automation Systems Based on PLC |
10 |
4 |
Basile, F.; Chiacchio, P.; Gerbasio,
D. |
|
Two-Level Hierarchical Hybrid
Control for Smart Power System |
10 |
4 |
Dou, C. X.; Duan, Z. S.; Liu, B. |
|
On the Problem of the Automated
Design of Large-Scale Robot Skin |
10 |
4 |
Anghinolfi, D.; Cannata, G.;
Mastrogiovanni, F.; Nattero, C.; Paolucci, M. |
|
Ray-Shooting Algorithms for Robotics |
10 |
4 |
Zheng, Y.; Yamane, K. |
|
Learning to Segment and Track in
RGBD |
10 |
4 |
Teichman, A.; Lussier, J.T.; Thrun,
S. |
|
A Unified Distance Function
Framework for Workpiece Fixturing Modeling and Analysis |
10 |
4 |
Luo, C.; Zhu, L.; Ding, H. |
|
A Chance Constrained Programming
Approach to Determine the Optimal Disassembly Sequence |
10 |
4 |
Tian, G.; Zhou, M.; Chu, J. |
|
Large-Scale Estimation in
Cyberphysical Systems Using Streaming Data: A Case Study With Arterial
Traffic Estimation |
10 |
4 |
Hunter, T.; Das, T.; Zaharia, M.;
Abbeel, P.; Bayen, A.M. |
|
A State-Space-Based Prognostic Model
for Hidden and Age-Dependent Nonlinear Degradation Process |
10 |
4 |
Feng, L.; Wang, H.; Si, X.; Zou, H. |
|
Optimization Algorithms for
Kinematically Optimal Design of Parallel Manipulators |
To Appear |
|
Lou, Y.; Zhang, Y.; Huang, R.; Chen,
X.; Li, Z. |
|
A Quality Flow Model in Battery
Manufacturing Systems for Electric Vehicles |
To Appear |
Ju, F.; Li, J.; Xiao, G.; Huang, N.;
Biller, S. |
|
|
Computation of the Precise
Worst-Case Response Time of FlexRay Dynamic Messages |
To Appear |
Ouedraogo, L.; Kumar, R. |
|
|
Automatic Bird Species Detection
From Crowd Sourced Videos |
To Appear |
Li, W.; Song, D. |
|
|
A Generalized Result for Degradation
Model-Based Reliability Estimation |
To Appear |
Si, X.-S.; Zhou, D. |
|
|
Parallel Machine Selection and Job
Scheduling to Minimize Sum of Machine Holding Cost, Total Machine Time Costs,
and Total Tardiness Costs |
To Appear |
Alidaee, B.; Li, H. |
|
|
An Improved Mixed Integer
Programming Approach for Multi-Hoist Cyclic Scheduling Problem |
To Appear |
Che, A.; Lei, W.; Feng, J.; Chu, C. |
|
|
A Feasible and Easy-to-Implement
Anticollision Algorithm for the EPCglobal UHF Class-1 Generation-2 RFID
Protocol |
To Appear |
Chen, W.-T. |
|
|
Training Initialization of Hidden
Markov Models in Human Action Recognition |
To Appear |
Moghaddam, Z.; Piccardi, M. |
|
|
Efficient Enumeration of Minimal
Unsafe States in Complex Resource Allocation Systems |
To Appear |
Nazeem, A.; Reveliotis, S. |
|
|
Optimization of Total Energy
Consumption in Flexible Manufacturing Systems Using Weighted P-Timed Petri
Nets and Dynamic Programming |
To Appear |
Pang, C.K.; Le, C.V. |
|
|
Fault-Tolerant Control for Safety of
Discrete-Event Systems |
To Appear |
Shu, S.; Lin, F. |
|
|
Constrained Optimal Test Signal
Design for Improved Prediction Error |
To Appear |
Fang, K.; Shenton, A.T. |
|
|
Dynamic Surgery Assignment of Multiple
Operating Rooms With Planned Surgeon Arrival Times |
To Appear |
Zhang, Z.; Xie, X.; Geng, N. |
|
|
Degree of Redundancy of Linear
Systems Using Implicit Set Covering |
To Appear |
Arellano, J.D.; Hicks, I.V. |
|
|
A Toolkit for Modeling and
Simulation of Real-Time Virtual Machine Allocation in a Cloud Data Center |
To Appear |
Tian, W.; Zhao, Y.; Xu, M.; Zhong,
Y.; Sun, X. |
|
|
Optimal Subtask Allocation for Human
and Robot Collaboration Within Hybrid Assembly System |
To Appear |
Chen, F.; Sekiyama, K.; Cannella,
F.; Fukuda, T. |
|
|
Optimal Computing Budget Allocation
for Complete Ranking |
To Appear |
Xiao, H.; Lee, L. H.; Ng, K. M. |
|
|
On the Optimal Deployment of
Direction Finders |
To Appear |
Kim, S.; Wilhelm, W.E. |
|
|
Modeling and Analysis of Care
Delivery Services Within Patient Rooms: A System-Theoretic Approach |
To Appear |
Wang, J.; Zhong, X.; Li, J.; Howard,
P. K. |
|
|
Optimal Supervisory Control of
Flexible Manufacturing Systems by Petri Nets: A Set Classification Approach |
To Appear |
Chen, Y.; Li, Z.; Zhou, M. |
|
|
Blocking Effects in Warehouse
Systems With Autonomous Vehicles |
To Appear |
Roy, D.; Krishnamurthy, A.; Heragu,
S.S.; Malmborg, C.J. |
|
|
Object-Oriented Templates for
Automated Assembly Planning of Complex Products |
To Appear |
Xu, L. D.; Wang, C.; Bi, Z.; Yu, J. |
|
|
Cigarette Production Scheduling by
Combining Workflow Model and Immune Algorithm |
To Appear |
Zuo, X.; Tan, W.; Lin, H. |
|
|
Planar Compliances of Symmetric
Notch Flexure Hinges: The Right Circularly Corner-Filleted Parabolic Design |
To Appear |
Lobontiu, N.; Cullin, M.; Petersen,
T.; Alcazar, J. A.; Noveanu, S. |
|
|
Extended Interference Matrices for
Exploded View of Assembly Planning |
To Appear |
Yu, J.; Xu, L. D.; Bi, Z.; Wang, C. |
|
|
Robust Electromagnetic Control of
Microrobots Under Force and Localization Uncertainties |
To Appear |
Marino, H.; Bergeles, C.; Nelson,
B.J. |
|
|
A Study on Sinus-Lifting Motion of a
Snake Robot With Sequential Optimization of a Hybrid System |
To Appear |
Toyoshima, S.; Tanaka, M.; Matsuno,
F. |
|
|
Automated Manipulation of Biological
Cells Using Gripper Formations Controlled By Optical Tweezers |
To Appear |
Chowdhury, S.; Thakur, A.; Svec, P.;
Wang, C.; Losert, W.; Gupta, S.K. |
|
|
An Optimal Sample Allocation
Strategy for Partition-Based Random Search |
To Appear |
Chen, W.; Gao, S.; Chen, C.-H.; Shi,
L. |
|
|
Recursive Modeling of Stateflow as
Input/Output-Extended Automaton |
To Appear |
Li, M.; Kumar, R. |
|
|
Self-Adaptive Learning PSO-Based
Deadline Constrained Task Scheduling for Hybrid IaaS Cloud |
To Appear |
Zuo, X.; Zhang, G.; Tan, W. |
|
|
A Propagative Model of Simultaneous Impact:
Existence, Uniqueness, and Design Consequences |
To Appear |
Seghete, V.; Murphey, T.D. |
|
|
Building Energy Doctors: An SPC and
Kalman Filter-Based Method for System-Level Fault Detection in HVAC Systems |
To Appear |
Sun, B.; Luh, P. B.; Jia, Q.-S.;
O'Neill, Z.; Song, F. |
|
|
An Intelligent Decision Support
System for the Operating Theater: A Case Study |
To Appear |
Sperandio, F.; Gomes, C.; Borges,
J.; Brito, A. C.; Almada-Lobo, B. |
|
|
A Multiagent Q-Learning-Based
Optimal Allocation Approach for Urban Water Resource Management System |
To Appear |
Ni, J.; Liu, M.; Ren, L.; Yang, S.
X. |
|
|
Robotic Explosive Charging in Mining
and Construction Applications |
To Appear |
Bonchis, A.; Duff, E.; Roberts, J.;
Bosse, M. |
|
|
Emulating Nuclear Emissions With a
Pulsed Laser |
To Appear |
Hockman, B.J.; Sun, J.; Tanner, H.G. |
|
|
A Lipschitz Regularity-Based
Statistical Model With Applications in Coordinate Metrology |
To Appear |
Kim, H.; Huo, X.; Shilling, M.;
Tran, H.D. |
|
|
Non-Cyclic Scheduling of a Wet
Station |
To Appear |
Kim, H.-J.; Lee, J.-H.; Lee, T.-E. |
|
|
Freeway Traffic Modeling and Control
in a First-Order Hybrid Petri Net Framework |
To Appear |
Fanti, M.P.; Iacobellis, G.;
Mangini, A.M.; Ukovich, W. |
|
|
Improving Response-Time Performance
in Acute Care Delivery: A Systems Approach |
To Appear |
Xie, X.; Li, J.; Swartz, C.H.;
DePriest, P. |
|
|
Timed Compatibility Analysis of Web
Service Composition: A Modular Approach Based on Petri Nets |
To Appear |
Du, Y.; Tan, W.; Zhou, M.C. |
|
|
Path Generation Using mbin⁴-Splines for a Truck and
Trailer Vehicle |
To Appear |
Ghilardelli, F.; Lini, G.; Piazzi,
A. |
|
|
Bond Graph Approach for Plant Fault
Detection and Isolation: Application to Intelligent Autonomous Vehicle |
To Appear |
Benmoussa, S.; Bouamama, B.O.; Merzouki,
R. |
|
|
Multiobjective Flexible Job Shop
Scheduling Using Memetic Algorithms |
To Appear |
Yuan, Y.; Xu, H. |
|
|
Similarity Searching for Defective
Wafer Bin Maps in Semiconductor Manufacturing |
To Appear |
Liao, C.-S.; Hsieh, T.-J.; Huang,
Y.-S.; Chien, C.-F. |